+380 50 364 66 46 Mon–Fri 8:00–17:00 Kyiv time Wishlist0 Compare0
Prices are in euros. The final price and delivery cost are confirmed in the quote.
Simplified drawing of the bearing per ISO 8826-1, dimensions of UY 209 2S.Y: ⌀45 × ⌀85 × 44 mm⌀85⌀4544UY 209 2S.Y2S
Fig. 1: UY 209 2S.Y, simplified drawing per ISO 8826-1. Dimensions in mm
Insert bearing FKL UY 209 2S.Y — photo 1
Insert bearing FKL UY 209 2S.Y — photo 2
Insert bearing FKL UY 209 2S.Y — photo 3
Load: radial medium; axial low, on both sidesInsert with eccentric collar

Insert bearing FKL UY 209 2S.Y

€35.59per piece
Available to orderThe manager confirms the lead time
Request a quote

Specifications

Manufacturer number
d
45 mm
Bore diameter dBearing bore = shaft diameter. Source: supplier data
D
85 mm
Outside diameter DOutside diameter = housing bore. Source: two supplier sources
Outer ring width C
22 mm
Outer ring width CWidth of the outer ring. Source: supplier data
B
44 mm
Width BRing width. Source: supplier data
Seal
2Scontact seals on both sides
C
33.2 kN
Basic dynamic load rating CLoad for one million revolutions at 90 % reliability; the L10 life is calculated from it as (C/P)^p. ISO method, manufacturer’s figure: do not carry it over to another brand. Source: supplier data
C0
21.6 kN
Basic static load rating C0Permissible load without rotation and under shock; ISO 76 method, manufacturer’s figure. Source: supplier data
01

Details

what this bearing is, questions

About the bearing

d×D×Bsize 45 × 85 × 44mm
Cdynamic 33.2kN
C0static 21.6kN

Insert with eccentric collar bearing UY 209 2S.Y, design 2S: contact seals on both sides.

C, C₀: FKL data. Another brand publishes its own figures, so compare them against that brand’s catalogue.

Frequently asked questions

How does 2RS differ from ZZ?

2RS has rubber seals that touch the inner ring and keep out dust and water better, which is the usual choice for field machinery. ZZ has metal shields that do not touch, allow higher speeds, and protect against dirt less well.

Can I fit another brand instead of this bearing?

Without checking, only an exact equivalent: the size, seal, clearance and design match according to the brand’s catalogue. Positions with the same geometry differ in seal, clearance or design, and each one says so in the equivalents block. Load ratings differ between manufacturers, so for a heavily loaded unit compare C.

How do I get a price and a lead time?

Press “Request a quote” and send the part number and quantity. We reply with the price, availability and delivery terms for your country.

02

Reviews

No reviews yet