+380 50 364 66 46 Mon–Fri 8:00–17:00 Kyiv time Wishlist0 Compare0
Prices are in euros. The final price and delivery cost are confirmed in the quote.
Simplified drawing of the bearing per ISO 8826-1, dimensions of UH 205/20 2S.H.T: ⌀20 × ⌀52 × 29 mm⌀52⌀2029UH 205/20 2S.H.T2S
Fig. 1: UH 205/20 2S.H.T, simplified drawing per ISO 8826-1. Dimensions in mm
Bearing FKL UH 205/20 2S.H.T — photo 1
Bearing FKL UH 205/20 2S.H.T — photo 2
Bearing FKL UH 205/20 2S.H.T — photo 3
Load: radial high; axial medium, on both sidesOn an adapter sleeve

Bearing FKL UH 205/20 2S.H.T

€19.26per piece
Available to orderThe manager confirms the lead time
Request a quote

Specifications

Manufacturer number
d
20 mm
Bore diameter dBearing bore = shaft diameter. Source: two supplier sources
D
52 mm
Outside diameter DOutside diameter = housing bore. Source: two supplier sources
Outer ring width C
16 mm
Outer ring width CWidth of the outer ring. Source: supplier data
B
29 mm
Width BRing width. Source: supplier data
Seal
2Scontact seals on both sides
C
14 kN
Basic dynamic load rating CLoad for one million revolutions at 90 % reliability; the L10 life is calculated from it as (C/P)^p. ISO method, manufacturer’s figure: do not carry it over to another brand. Source: two supplier sources
C0
7.8 kN
Basic static load rating C0Permissible load without rotation and under shock; ISO 76 method, manufacturer’s figure. Source: two supplier sources
01

Details

what this bearing is, questions

About the bearing

d×D×Bsize 20 × 52 × 29mm
Cdynamic 14kN
C0static 7.8kN

On an adapter sleeve bearing UH 205/20 2S.H.T, design 2S: contact seals on both sides.

C, C₀: FKL data. Another brand publishes its own figures, so compare them against that brand’s catalogue.

Frequently asked questions

How does 2RS differ from ZZ?

2RS has rubber seals that touch the inner ring and keep out dust and water better, which is the usual choice for field machinery. ZZ has metal shields that do not touch, allow higher speeds, and protect against dirt less well.

Can I fit another brand instead of this bearing?

Without checking, only an exact equivalent: the size, seal, clearance and design match according to the brand’s catalogue. Positions with the same geometry differ in seal, clearance or design, and each one says so in the equivalents block. Load ratings differ between manufacturers, so for a heavily loaded unit compare C.

How do I get a price and a lead time?

Press “Request a quote” and send the part number and quantity. We reply with the price, availability and delivery terms for your country.

02

Reviews

No reviews yet