+380 50 364 66 46 Mon–Fri 8:00–17:00 Kyiv time Wishlist0 Compare0
Prices are in euros. The final price and delivery cost are confirmed in the quote.
Simplified drawing of the bearing per ISO 8826-1, dimensions of 6210 NR: ⌀50 × ⌀90 × 20 mm⌀90⌀50206210 NR
Fig. 1: 6210 NR, simplified drawing per ISO 8826-1. Dimensions in mm

There is no photo of this product: the drawing shows the dimensions of 6210 NR

Load: radial medium; axial low, on both sidesDeep groove ball

Bearing FKL 6210 NR

€18.83per piece
Available to orderThe manager confirms the lead time
Request a quote

Specifications

Manufacturer number
ISO designation
GOST number
OEM number
532.03.320
Equivalents
5 exact, 72 approximate
d
50 mm
Bore diameter dBearing bore = shaft diameter. Source: two supplier sources
D
90 mm
Outside diameter DOutside diameter = housing bore. Source: two supplier sources
B
20 mm
Width BRing width. Source: two supplier sources
Seal
open, no protection
Clearance
normal clearance
m
0.64 kg
MassWeight of the product. Source: supplier data
01

Equivalents

the same size 50 × 90 × 20 from other brands

77 products
Photo: 6210 NR
You are viewingFKL 6210 NR
€18.83baseline for the price comparison

Everything the number specifies matches: series 62, 50 × 90 × 20 mm, open, no protection, NR, normal clearance, special design. The codes in the number are read against the FKL catalogue.

Under the price: the difference from the price of this bearing (€18.83).
02

Details

what this bearing is, questions

About the bearing

D 90d 50B 20
d×D×Bsize 50 × 90 × 20mm
mweight 0.64kg

Deep groove ball bearing 6210. Under GOST the same bearing is designated 210.

M: FKL data. Another brand publishes its own figures, so compare them against that brand’s catalogue.

Frequently asked questions

What is 210?

It is the same bearing under GOST 3189-89: 210 corresponds to the ISO base 6210. Size 50 × 90 × 20 mm, a full equivalent of 6210.

Will 6210 C3 fit instead?

Same size, clearance greater than normal. C3 is used where the bearing runs hot or sits on the shaft with an interference fit. If the old bearing is not marked C3, take this one.

Can I fit another brand instead of this bearing?

Without checking, only an exact equivalent: the size, seal, clearance and design match according to the brand’s catalogue. Positions with the same geometry differ in seal, clearance or design, and each one says so in the equivalents block. Load ratings differ between manufacturers, so for a heavily loaded unit compare C.

How do I get a price and a lead time?

Press “Request a quote” and send the part number and quantity. We reply with the price, availability and delivery terms for your country.

03

Reviews

No reviews yet