+380 50 364 66 46 Mon–Fri 8:00–17:00 Kyiv time Wishlist0 Compare0
Prices are in euros. The final price and delivery cost are confirmed in the quote.
Drawing of 6204 ZZ C3: ⌀20 × ⌀47 × 14 mm6204 ZZ C3ZZ
Fig. 1: 6204 ZZ C3, end view and section; rolling element geometry per the NSK catalogue. Dimensions in mm
Bearing FKL 6204 ZZ C3 — photo 1
Bearing FKL 6204 ZZ C3 — photo 2
Load: radial medium; axial low, on both sidesDeep groove ball

Bearing FKL 6204 ZZ C3

€2.70per piece
Available to orderThe manager confirms the lead time
Request a quote

Specifications

Manufacturer number
ISO designation
Equivalents
9 exact, 107 approximate
d
20 mm
Bore diameter dBearing bore = shaft diameter. Source: two supplier sources
D
47 mm
Outside diameter DOutside diameter = housing bore. Source: two supplier sources
B
14 mm
Width BRing width. Source: two supplier sources
Seal
ZZshields, both sides
Clearance
C3
m
0.11 kg
MassWeight of the product. Source: supplier data
01

Equivalents

the same size 20 × 47 × 14 from other brands

117 products
Photo: 6204 ZZ C3
You are viewingFKL 6204 ZZ C3
€2.70baseline for the price comparison

Everything the number specifies matches: series 62, 20 × 47 × 14 mm, metal shields on both sides, clearance C3, ordinary steel, design without special letters. The codes in the number are read against the FKL catalogue.

Under the price: the difference from the price of this bearing (€2.70).
02

Details

what this bearing is, questions

About the bearing

D 47d 20B 14
d×D×Bsize 20 × 47 × 14mm
mweight 0.11kg

Deep groove ball bearing 6204-ZZ C3, design ZZ: metal shields on both sides.

M: FKL data. Another brand publishes its own figures, so compare them against that brand’s catalogue.

Frequently asked questions

How does 2RS differ from ZZ?

2RS has rubber seals that touch the inner ring and keep out dust and water better, which is the usual choice for field machinery. ZZ has metal shields that do not touch, allow higher speeds, and protect against dirt less well.

Can I fit another brand instead of this bearing?

Without checking, only an exact equivalent: the size, seal, clearance and design match according to the brand’s catalogue. Positions with the same geometry differ in seal, clearance or design, and each one says so in the equivalents block. Load ratings differ between manufacturers, so for a heavily loaded unit compare C.

How do I get a price and a lead time?

Press “Request a quote” and send the part number and quantity. We reply with the price, availability and delivery terms for your country.

03

Reviews

No reviews yet