+380 50 364 66 46 Mon–Fri 8:00–17:00 Kyiv time Wishlist0 Compare0
Prices are in euros. The final price and delivery cost are confirmed in the quote.
Simplified drawing of the bearing per ISO 8826-1, dimensions of QJ 306 MPA: ⌀30 × ⌀72 × 19 mm⌀72⌀3019QJ 306 MPA
Fig. 1: QJ 306 MPA, simplified drawing per ISO 8826-1. Dimensions in mm

There is no photo of this product: the drawing shows the dimensions of QJ 306-MPA

Load: radial medium; axial low, on both sidesDeep groove ball

Bearing FAG QJ 306-MPA

€65.00per piece
Available to orderThe manager confirms the lead time
Request a quote

Specifications

Manufacturer number
d
30 mm
Bore diameter dBearing bore = shaft diameter. Source: two supplier sources
D
72 mm
Outside diameter DOutside diameter = housing bore. Source: two supplier sources
B
19 mm
Width BRing width. Source: two supplier sources
Seal
open, no protection
Clearance
normal clearance
m
0.379 kg
MassWeight of the product. Source: supplier data
01

Details

what this bearing is, questions

About the bearing

D 72d 30B 19
d×D×Bsize 30 × 72 × 19mm
mweight 0.379kg

Deep groove ball bearing QJ 306 MPA.

M: FAG data. Another brand publishes its own figures, so compare them against that brand’s catalogue.

Frequently asked questions

Can I fit another brand instead of this bearing?

Without checking, only an exact equivalent: the size, seal, clearance and design match according to the brand’s catalogue. Positions with the same geometry differ in seal, clearance or design, and each one says so in the equivalents block. Load ratings differ between manufacturers, so for a heavily loaded unit compare C.

How do I get a price and a lead time?

Press “Request a quote” and send the part number and quantity. We reply with the price, availability and delivery terms for your country.

02

Reviews

No reviews yet