+380 50 364 66 46 Mon–Fri 8:00–17:00 Kyiv time Wishlist0 Compare0
Drawing of NUP 2311 E-XL-TVP2: ⌀55 × ⌀120 × 43 mm⌀120⌀5543NUP 2311 E-XL-TVP2
Fig. 1: NUP 2311 E-XL-TVP2, end view and section; internal parts simplified per ISO 8826-1. Dimensions in mm

There is no photo of this product: the drawing shows the dimensions of NUP 2311-E-XL-TVP2

Load: radial high; axial low, on both sidesCylindrical roller NUP

Bearing FAG NUP 2311-E-XL-TVP2

Price on request
Available to order
Request a quote

Specifications

Manufacturer number
Equivalents
1 exact, 9 approximate
d
55 mm
Bore diameter dBearing bore = shaft diameter. Source: supplier data
D
120 mm
Outside diameter DOutside diameter = housing bore. Source: supplier data
B
43 mm
Width BRing width. Source: supplier data
Seal
open, no protection
Clearance
normal clearance
01

Equivalents

the same size 55 × 120 × 43 from other brands

11 products
Cross-section drawing to size: Cylindrical roller NUP, 55 × 120 × 43 mm
You are viewingFAG NUP 2311-E-XL-TVP2

Same size, different design: the difference is written in the row.

  • Photo: NJ 2311 ENJ 2311 EEZ&S55 × 120 × 43available to order€36.05Request a quote
  • Type diagram, no dimensions: rollerNJ 2311-E-XL-MPAX-C3clearance C3, E, MPA, XL, XFAG55 × 120 × ?available to orderon requestRequest a quote
  • Cross-section drawing to size: Cylindrical roller NU, 55 × 120 × 43 mmNU 2311 E M1E, M1FAG55 × 120 × 43available to orderon requestRequest a quote
  • Cross-section drawing to size: Cylindrical roller NU, 55 × 120 × 43 mmNU 2311 E XL M1AE, M1A, XLFAG55 × 120 × 43available to orderon requestRequest a quote
  • Cross-section drawing to size: Cylindrical roller NU, 55 × 120 × 43 mmNU 2311 ETE, TNSK55 × 120 × 43available to orderon requestRequest a quote
  • Cross-section drawing to size: Cylindrical roller NJ, 55 × 120 × 43 mmNJ 2311 ECPreinforced design EC, PSKF55 × 120 × 43available to orderon requestRequest a quote
  • Cross-section drawing to size: Cylindrical roller NJ, 55 × 120 × 43 mmNJ 2311 ECP/C3clearance C3, reinforced design EC, PSKF55 × 120 × 43available to orderon requestRequest a quote
  • Cross-section drawing to size: Cylindrical roller NU, 55 × 120 × 43 mmNU 2311 ECMLreinforced design EC, MLSKF55 × 120 × 43available to orderon requestRequest a quote
  • Cross-section drawing to size: Cylindrical roller NJ, 55 × 120 × 43 mmNJ 2311 E-XL-TVP2-C3clearance C3FAG55 × 120 × 43available to orderon requestRequest a quote
02

Details

what this bearing is, questions

About the bearing

d×D×Bsize 55 × 120 × 43mm

Cylindrical roller NUP bearing NUP 2311 E-XL-TVP2.

Frequently asked questions

Will 2311 C3 fit instead?

Same size, clearance greater than normal. C3 is used where the bearing runs hot or sits on the shaft with an interference fit. If the old bearing is not marked C3, take this one.

Can I fit another brand instead of this bearing?

Without checking, only an exact equivalent: the size, seal, clearance and design match according to the brand’s catalogue. Positions with the same geometry differ in seal, clearance or design, and each one says so in the equivalents block. Load ratings differ between manufacturers, so for a heavily loaded unit compare C.

How do I get a price and a lead time?

Press “Request a quote” and send the part number and quantity. We reply with the price, availability and delivery terms for your country.

03

Reviews

No reviews yet