+380 50 364 66 46 Mon–Fri 8:00–17:00 Kyiv time Wishlist0 Compare0
Drawing of NU 2322 E XL M1: ⌀110 × ⌀240 × 80 mm⌀240⌀11080NU 2322 E XL M1
Fig. 1: NU 2322 E XL M1, end view and section; internal parts simplified per ISO 8826-1. Dimensions in mm

There is no photo of this product: the drawing shows the dimensions of NU 2322-E-XL-M1

Load: radial high; no axial loadCylindrical roller NU

Bearing FAG NU 2322-E-XL-M1

Price on request
Available to order
Request a quote

Specifications

Manufacturer number
Equivalents
1 exact, 5 approximate
d
110 mm
Bore diameter dBearing bore = shaft diameter. Source: supplier data
D
240 mm
Outside diameter DOutside diameter = housing bore. Source: supplier data
B
80 mm
Width BRing width. Source: supplier data
Seal
open, no protection
Clearance
normal clearance
01

Equivalents

the same size 110 × 240 × 80 from other brands

6 products
Cross-section drawing to size: Cylindrical roller NU, 110 × 240 × 80 mm
You are viewingFAG NU 2322-E-XL-M1

Same size, different design: the difference is written in the row.

  • Cross-section drawing to size: Cylindrical roller, 110 × 240 × 80 mm2622 (N2322)standard designCT110 × 240 × 80available to orderon requestRequest a quote
  • Cross-section drawing to size: Cylindrical roller NU, 110 × 240 × 80 mmNU2322MMCT110 × 240 × 80available to orderon requestRequest a quote
  • Cross-section drawing to size: Cylindrical roller NU, 110 × 240 × 80 mmNU 2322 E-XL-TVP2-C3clearance C3, E, TVP2, XLFAG110 × 240 × 80available to orderon requestRequest a quote
  • Cross-section drawing to size: Cylindrical roller NJ, 110 × 240 × 80 mmNJ 2322-E-XL-M1-C3clearance C3FAG110 × 240 × 80available to orderon requestRequest a quote
  • Cross-section drawing to size: Cylindrical roller NU, 110 × 240 × 80 mmNU 2322 E-XL-M1-C3clearance C3FAG110 × 240 × 80available to orderon requestRequest a quote
02

Details

what this bearing is, questions

About the bearing

d×D×Bsize 110 × 240 × 80mm

Cylindrical roller NU bearing NU 2322 E XL M1.

Frequently asked questions

Will 2322 C3 fit instead?

Same size, clearance greater than normal. C3 is used where the bearing runs hot or sits on the shaft with an interference fit. If the old bearing is not marked C3, take this one.

Can I fit another brand instead of this bearing?

Without checking, only an exact equivalent: the size, seal, clearance and design match according to the brand’s catalogue. Positions with the same geometry differ in seal, clearance or design, and each one says so in the equivalents block. Load ratings differ between manufacturers, so for a heavily loaded unit compare C.

How do I get a price and a lead time?

Press “Request a quote” and send the part number and quantity. We reply with the price, availability and delivery terms for your country.

03

Reviews

No reviews yet