+380 50 364 66 46 Mon–Fri 8:00–17:00 Kyiv time Wishlist0 Compare0
Drawing of N312-E-M1: ⌀60 × ⌀130 × 31 mm⌀130⌀6031N312-E-M1
Fig. 1: N312-E-M1, end view and section; internal parts simplified per ISO 8826-1. Dimensions in mm

There is no photo of this product: the drawing shows the dimensions of N312-E-M1

Load: radial high; no axial loadCylindrical roller N

Bearing FAG N312-E-M1

Price on request
Available to order
Request a quote

Specifications

Manufacturer number
Equivalents
1 exact, 41 approximate
d
60 mm
Bore diameter dBearing bore = shaft diameter. Source: supplier data
D
130 mm
Outside diameter DOutside diameter = housing bore. Source: supplier data
B
31 mm
Width BRing width. Source: supplier data
Seal
open, no protection
Clearance
normal clearance
01

Equivalents

the same size 60 × 130 × 31 from other brands

49 products
Cross-section drawing to size: Cylindrical roller N, 60 × 130 × 31 mm
You are viewingFAG N312-E-M1

Same size, different design: the difference is written in the row.

  • Cross-section drawing to size: Cylindrical roller NU, 60 × 130 × 31 mmNU 312different designCT60 × 130 × 3176 pcs€7.95Request a quote
  • Cross-section drawing to size: Cylindrical roller NJ, 60 × 130 × 31 mmNJ 312different designCT60 × 130 × 3137 pcs€8.91Request a quote
  • Cross-section drawing to size: Cylindrical roller N, 60 × 130 × 31 mmN312J PQJ, PQ: not decodedNTE60 × 130 × 3137 pcs€15.41Request a quote
  • Type diagram, no dimensions: rollerNF312J PQJ, PQ: not decodedNTE60 × 130 × ?10 pcs€15.41Request a quote
  • Cross-section drawing to size: Cylindrical roller NJ, 60 × 130 × 31 mmNJ312J PQJ, PQ: not decodedNTE60 × 130 × 3118 pcs€15.41Request a quote
  • Cross-section drawing to size: Cylindrical roller NU, 60 × 130 × 31 mmNU312J PQJ, PQ: not decodedNTE60 × 130 × 318 pcs€15.41Request a quote
  • Photo: NJ 312NJ 312different designGPZ60 × 130 × 31available to order€34.56Request a quote
  • Photo: NU 312NU 312different designGPZ60 × 130 × 31available to order€36.20Request a quote
  • Cross-section drawing to size: Cylindrical roller, 60 × 130 × 31 mm92312 (NUP312EM)standard designCT60 × 130 × 31available to orderon requestRequest a quote
  • Series illustration (not a photo of this item): NJ 312 ENJ 312 EECT60 × 130 × 31available to orderon requestRequest a quote
02

Details

what this bearing is, questions

About the bearing

d×D×Bsize 60 × 130 × 31mm

Cylindrical roller N bearing N312-E-M1.

Frequently asked questions

Will 312 C3 fit instead?

Same size, clearance greater than normal. C3 is used where the bearing runs hot or sits on the shaft with an interference fit. If the old bearing is not marked C3, take this one.

Can I fit another brand instead of this bearing?

Without checking, only an exact equivalent: the size, seal, clearance and design match according to the brand’s catalogue. Positions with the same geometry differ in seal, clearance or design, and each one says so in the equivalents block. Load ratings differ between manufacturers, so for a heavily loaded unit compare C.

How do I get a price and a lead time?

Press “Request a quote” and send the part number and quantity. We reply with the price, availability and delivery terms for your country.

03

Reviews

No reviews yet