+380 50 364 66 46 Mon–Fri 8:00–17:00 Kyiv time Wishlist0 Compare0
Drawing of N 232 E-XL-M1: ⌀160 × ⌀290 × 48 mm⌀290⌀16048N 232 E-XL-M1
Fig. 1: N 232 E-XL-M1, end view and section; internal parts simplified per ISO 8826-1. Dimensions in mm

There is no photo of this product: the drawing shows the dimensions of N 232-E-XL-M1

Load: radial high; no axial loadCylindrical roller N

Bearing FAG N 232-E-XL-M1

Price on request
Available to order
Request a quote

Specifications

Manufacturer number
Equivalents
1 exact, 8 approximate
d
160 mm
Bore diameter dBearing bore = shaft diameter. Source: supplier data
D
290 mm
Outside diameter DOutside diameter = housing bore. Source: supplier data
B
48 mm
Width BRing width. Source: supplier data
Seal
open, no protection
Clearance
normal clearance
01

Equivalents

the same size 160 × 290 × 48 from other brands

9 products
Cross-section drawing to size: Cylindrical roller N, 160 × 290 × 48 mm
You are viewingFAG N 232-E-XL-M1

Same size, different design: the difference is written in the row.

  • Cross-section drawing to size: Cylindrical roller NJ, 160 × 290 × 48 mmNJ232different designCT160 × 290 × 48available to orderon requestRequest a quote
  • Series illustration (not a photo of this item): NJ232 EMC3NANJ232 EMC3NAclearance NA, ECT160 × 290 × 48available to orderon requestRequest a quote
  • Series illustration (not a photo of this item): NJ232 MNJ232 MMCT160 × 290 × 48available to orderon requestRequest a quote
  • Cross-section drawing to size: Cylindrical roller NU, 160 × 290 × 48 mmNU232different designCT160 × 290 × 48available to orderon requestRequest a quote
  • Cross-section drawing to size: Cylindrical roller NU, 160 × 290 × 48 mmNU 232 E XL M1different designFAG160 × 290 × 48available to orderon requestRequest a quote
  • Cross-section drawing to size: Cylindrical roller NU, 160 × 290 × 48 mmNU 232 EMC3clearance MC3, ENSK160 × 290 × 48available to orderon requestRequest a quote
  • Cross-section drawing to size: Cylindrical roller NU, 160 × 290 × 48 mmNU 232 ECML/C3clearance C3, reinforced design EC, MLSKF160 × 290 × 48available to orderon requestRequest a quote
  • Cross-section drawing to size: Cylindrical roller NU, 160 × 290 × 48 mmNU232-E-XL-M1-C3clearance C3FAG160 × 290 × 48available to orderon requestRequest a quote
02

Details

what this bearing is, questions

About the bearing

d×D×Bsize 160 × 290 × 48mm

Cylindrical roller N bearing N 232 E-XL-M1.

Frequently asked questions

Will 232 C3 fit instead?

Same size, clearance greater than normal. C3 is used where the bearing runs hot or sits on the shaft with an interference fit. If the old bearing is not marked C3, take this one.

Can I fit another brand instead of this bearing?

Without checking, only an exact equivalent: the size, seal, clearance and design match according to the brand’s catalogue. Positions with the same geometry differ in seal, clearance or design, and each one says so in the equivalents block. Load ratings differ between manufacturers, so for a heavily loaded unit compare C.

How do I get a price and a lead time?

Press “Request a quote” and send the part number and quantity. We reply with the price, availability and delivery terms for your country.

03

Reviews

No reviews yet