+380 50 364 66 46 Mon–Fri 8:00–17:00 Kyiv time Wishlist0 Compare0
Drawing of 7309 B-XL-MP-UA: ⌀45 × ⌀100 × 25 mm⌀100⌀45257309 B-XL-MP-UA
Fig. 1: 7309 B-XL-MP-UA, end view and section; internal parts simplified per ISO 8826-1. Dimensions in mm

There is no photo of this product: the drawing shows the dimensions of 7309-B-XL-MP-UA

Combined load at an angle (angular contact), axial on one sideAngular contact ball

Bearing FAG 7309-B-XL-MP-UA

Price on request
Available to order
Request a quote

Specifications

Manufacturer number
ISO designation
GOST number
Equivalents
3 exact, 9 approximate
d
45 mm
Bore diameter dBearing bore = shaft diameter. Source: supplier data
D
100 mm
Outside diameter DOutside diameter = housing bore. Source: supplier data
B
25 mm
Width BRing width. Source: supplier data
Seal
open, no protection
01

Equivalents

the same size 45 × 100 × 25 from other brands

13 products
Cross-section drawing to size: Angular contact ball, 45 × 100 × 25 mm
You are viewingFAG 7309-B-XL-MP-UA

Everything the number specifies matches: series 73, 45 × 100 × 25 mm, open, no protection, B, special design. The codes in the number are read against the FAG catalogue.

  • Cross-section drawing to size: Angular contact ball, 45 × 100 × 25 mm7309 B-XL-MP-UAThis bearingFAG45 × 100 × 25available to orderon requestyou are here
  • Series illustration (not a photo of this item): 7309 B7309 BKG45 × 100 × 25available to orderon requestRequest a quote
  • Cross-section drawing to size: Angular contact ball, 45 × 100 × 25 mm7309B.MPSLF45 × 100 × 25available to orderon requestRequest a quote
02

Details

what this bearing is, questions

About the bearing

D 100d 45B 25
d×D×Bsize 45 × 100 × 25mm

Angular contact ball bearing 7309 B. Under GOST the same bearing is designated 66309.

Frequently asked questions

What is 66309?

It is the same bearing under GOST 3189-89: 66309 corresponds to the ISO base 7309 B. Size 45 × 100 × 25 mm, a full equivalent of 7309 B.

Can I fit another brand instead of this bearing?

Without checking, only an exact equivalent: the size, seal, clearance and design match according to the brand’s catalogue. Positions with the same geometry differ in seal, clearance or design, and each one says so in the equivalents block. Load ratings differ between manufacturers, so for a heavily loaded unit compare C.

How do I get a price and a lead time?

Press “Request a quote” and send the part number and quantity. We reply with the price, availability and delivery terms for your country.

03

Reviews

No reviews yet