+380 50 364 66 46 Mon–Fri 8:00–17:00 Kyiv time Wishlist0 Compare0
Drawing of 7222 B-XL-MP-UA: ⌀110 × ⌀200 × 38 mm⌀200⌀110387222 B-XL-MP-UA
Fig. 1: 7222 B-XL-MP-UA, end view and section; internal parts simplified per ISO 8826-1. Dimensions in mm

There is no photo of this product: the drawing shows the dimensions of 7222-B-XL-MP-UA

Combined load at an angle (angular contact), axial on one sideAngular contact ball

Bearing FAG 7222-B-XL-MP-UA

Price on request
Available to order
Request a quote

Specifications

Manufacturer number
ISO designation
Equivalents
5 exact, 6 approximate
d
110 mm
Bore diameter dBearing bore = shaft diameter. Source: supplier data
D
200 mm
Outside diameter DOutside diameter = housing bore. Source: supplier data
B
38 mm
Width BRing width. Source: supplier data
Seal
open, no protection
01

Equivalents

the same size 110 × 200 × 38 from other brands

11 products
Cross-section drawing to size: Angular contact ball, 110 × 200 × 38 mm
You are viewingFAG 7222-B-XL-MP-UA

Everything the number specifies matches: series 72, 110 × 200 × 38 mm, open, no protection, B, special design. The codes in the number are read against the FAG catalogue.

  • Cross-section drawing to size: Angular contact ball, 110 × 200 × 38 mm7222 B-XL-MP-UAThis bearingFAG110 × 200 × 38available to orderon requestyou are here
  • Photo: 7222 B7222 BSKF110 × 200 × 38available to order€364.03Request a quote
  • Cross-section drawing to size: Angular contact ball, 110 × 200 × 38 mm7222-B-MPFAG110 × 200 × 38available to orderon requestRequest a quote
  • Cross-section drawing to size: Angular contact ball, 110 × 200 × 38 mm7222-B-MP-UAFAG110 × 200 × 38available to orderon requestRequest a quote
  • Cross-section drawing to size: Angular contact ball, 110 × 200 × 38 mm7222-B-XL-MPFAG110 × 200 × 38available to orderon requestRequest a quote
02

Details

what this bearing is, questions

About the bearing

D 200d 110B 38
d×D×Bsize 110 × 200 × 38mm

Angular contact ball bearing 7222 B.

Frequently asked questions

Can I fit another brand instead of this bearing?

Without checking, only an exact equivalent: the size, seal, clearance and design match according to the brand’s catalogue. Positions with the same geometry differ in seal, clearance or design, and each one says so in the equivalents block. Load ratings differ between manufacturers, so for a heavily loaded unit compare C.

How do I get a price and a lead time?

Press “Request a quote” and send the part number and quantity. We reply with the price, availability and delivery terms for your country.

03

Reviews

No reviews yet