+380 50 364 66 46 Mon–Fri 8:00–17:00 Kyiv time Wishlist0 Compare0
Drawing of 7212 B TVP UA: ⌀60 × ⌀110 × 22 mm⌀110⌀60227212 B TVP UA
Fig. 1: 7212 B TVP UA, end view and section; internal parts simplified per ISO 8826-1. Dimensions in mm

There is no photo of this product: the drawing shows the dimensions of 7212-B-TVP-UA

Combined load at an angle (angular contact), axial on one sideAngular contact ball

Bearing FAG 7212-B-TVP-UA

Price on request
Available to order
Request a quote

Specifications

Manufacturer number
ISO designation
GOST number
Equivalents
3 exact, 5 approximate
d
60 mm
Bore diameter dBearing bore = shaft diameter. Source: supplier data
D
110 mm
Outside diameter DOutside diameter = housing bore. Source: supplier data
B
22 mm
Width BRing width. Source: supplier data
Seal
open, no protection
01

Equivalents

the same size 60 × 110 × 22 from other brands

9 products
Cross-section drawing to size: Angular contact ball, 60 × 110 × 22 mm
You are viewingFAG 7212-B-TVP-UA

Everything the number specifies matches: series 72, 60 × 110 × 22 mm, open, no protection, B, special design. The codes in the number are read against the FAG catalogue.

  • Cross-section drawing to size: Angular contact ball, 60 × 110 × 22 mm7212 B TVP UAThis bearingFAG60 × 110 × 22available to orderon requestyou are here
  • Series illustration (not a photo of this item): 7212 B7212 BKG60 × 110 × 22available to orderon requestRequest a quote
  • Series illustration (not a photo of this item): 7212 B7212 BNTE60 × 110 × 22available to orderon requestRequest a quote
02

Details

what this bearing is, questions

About the bearing

D 110d 60B 22
d×D×Bsize 60 × 110 × 22mm

Angular contact ball bearing 7212 B. Under GOST the same bearing is designated 66212.

Frequently asked questions

What is 66212?

It is the same bearing under GOST 3189-89: 66212 corresponds to the ISO base 7212 B. Size 60 × 110 × 22 mm, a full equivalent of 7212 B.

Can I fit another brand instead of this bearing?

Without checking, only an exact equivalent: the size, seal, clearance and design match according to the brand’s catalogue. Positions with the same geometry differ in seal, clearance or design, and each one says so in the equivalents block. Load ratings differ between manufacturers, so for a heavily loaded unit compare C.

How do I get a price and a lead time?

Press “Request a quote” and send the part number and quantity. We reply with the price, availability and delivery terms for your country.

03

Reviews

No reviews yet