+380 50 364 66 46 Mon–Fri 8:00–17:00 Kyiv time Wishlist0 Compare0
Drawing of 7209 BMPUA: ⌀45 × ⌀85 × 19 mm⌀85⌀45197209 BMPUA
Fig. 1: 7209 BMPUA, end view and section; internal parts simplified per ISO 8826-1. Dimensions in mm

There is no photo of this product: the drawing shows the dimensions of 7209-B-MP-UA

Combined load at an angle (angular contact), axial on one sideAngular contact ball

Bearing FAG 7209-B-MP-UA

Price on request
Available to order
Request a quote

Specifications

Manufacturer number
ISO designation
GOST number
Equivalents
4 exact, 9 approximate
d
45 mm
Bore diameter dBearing bore = shaft diameter. Source: supplier data
D
85 mm
Outside diameter DOutside diameter = housing bore. Source: supplier data
B
19 mm
Width BRing width. Source: supplier data
Seal
open, no protection
01

Equivalents

the same size 45 × 85 × 19 from other brands

15 products
Cross-section drawing to size: Angular contact ball, 45 × 85 × 19 mm
You are viewingFAG 7209-B-MP-UA

Everything the number specifies matches: series 72, 45 × 85 × 19 mm, open, no protection, B, special design. The codes in the number are read against the FAG catalogue.

  • Cross-section drawing to size: Angular contact ball, 45 × 85 × 19 mm7209 BMPUAThis bearingFAG45 × 85 × 19available to orderon requestyou are here
  • Series illustration (not a photo of this item): 7209 B7209 BKG45 × 85 × 19available to orderon requestRequest a quote
  • Series illustration (not a photo of this item): 7209 B7209 BNACHI45 × 85 × 19available to orderon requestRequest a quote
  • Series illustration (not a photo of this item): 7209 B7209 BNTE45 × 85 × 19available to orderon requestRequest a quote
02

Details

what this bearing is, questions

About the bearing

D 85d 45B 19
d×D×Bsize 45 × 85 × 19mm

Angular contact ball bearing 7209 B. Under GOST the same bearing is designated 66209.

Frequently asked questions

What is 66209?

It is the same bearing under GOST 3189-89: 66209 corresponds to the ISO base 7209 B. Size 45 × 85 × 19 mm, a full equivalent of 7209 B.

Can I fit another brand instead of this bearing?

Without checking, only an exact equivalent: the size, seal, clearance and design match according to the brand’s catalogue. Positions with the same geometry differ in seal, clearance or design, and each one says so in the equivalents block. Load ratings differ between manufacturers, so for a heavily loaded unit compare C.

How do I get a price and a lead time?

Press “Request a quote” and send the part number and quantity. We reply with the price, availability and delivery terms for your country.

03

Reviews

No reviews yet