+380 50 364 66 46 Mon–Fri 8:00–17:00 Kyiv time Wishlist0 Compare0
Prices are in euros. The final price and delivery cost are confirmed in the quote.
Drawing of 6305 2HRS C3: ⌀25 × ⌀62 × 17 mm6305 2HRS C32HRS
Fig. 1: 6305 2HRS C3, end view and section; rolling element geometry per the NSK catalogue. Dimensions in mm

There is no photo of this product: the drawing shows the dimensions of 6305-2HRS-C3

Load: radial medium; axial low, on both sidesDeep groove ball

Bearing FAG 6305-2HRS-C3

€4.82per piece
In stock: 300 pcs
Request a quote

Specifications

Manufacturer number
ISO designation
Equivalents
11 exact, 63 approximate
d
25 mm
Bore diameter dBearing bore = shaft diameter. Source: supplier data
D
62 mm
Outside diameter DOutside diameter = housing bore. Source: supplier data
B
17 mm
Width BRing width. Source: supplier data
Seal
2HRScontact seals on both sides
Clearance
C3
01

Equivalents

the same size 25 × 62 × 17 from other brands

74 products
Series illustration (not a photo of this item): 6305 2HRS C3
You are viewingFAG 6305-2HRS-C3
€4.82baseline for the price comparison

Everything the number specifies matches: series 63, 25 × 62 × 17 mm, contact seals on both sides, clearance C3, ordinary steel, design without special letters. The codes in the number are read against the FAG catalogue.

Under the price: the difference from the price of this bearing (€4.82).
02

Details

what this bearing is, questions

About the bearing

D 62d 25B 17
d×D×Bsize 25 × 62 × 17mm

Deep groove ball bearing 6305-2RS C3, design 2HRS: contact seals on both sides.

Frequently asked questions

How does 2RS differ from ZZ?

2RS has rubber seals that touch the inner ring and keep out dust and water better, which is the usual choice for field machinery. ZZ has metal shields that do not touch, allow higher speeds, and protect against dirt less well.

Can I fit another brand instead of this bearing?

Without checking, only an exact equivalent: the size, seal, clearance and design match according to the brand’s catalogue. Positions with the same geometry differ in seal, clearance or design, and each one says so in the equivalents block. Load ratings differ between manufacturers, so for a heavily loaded unit compare C.

How do I get a price and a lead time?

Press “Request a quote” and send the part number and quantity. We reply with the price, availability and delivery terms for your country.

03

Reviews

No reviews yet