+380 50 364 66 46 Mon–Fri 8:00–17:00 Kyiv time Wishlist0 Compare0
Drawing of 6300 ZZ C3: ⌀10 × ⌀35 × 11 mm6300 ZZ C3ZZ
Fig. 1: 6300 ZZ C3, end view and section; rolling element geometry per the NSK catalogue. Dimensions in mm

There is no photo of this product: the drawing shows the dimensions of 6300-ZZ-C3

Load: radial medium; axial low, on both sidesDeep groove ball

Bearing FAG 6300-ZZ-C3

Price on request
Available to order
Request a quote

Specifications

Manufacturer number
ISO designation
Equivalents
1 exact, 24 approximate
d
10 mm
Bore diameter dBearing bore = shaft diameter. Source: two supplier sources
D
35 mm
Outside diameter DOutside diameter = housing bore. Source: two supplier sources
B
11 mm
Width BRing width. Source: two supplier sources
Seal
ZZshields, both sides
Clearance
C3
C
8.6 kN
Basic dynamic load rating CLoad for one million revolutions at 90 % reliability; the L10 life is calculated from it as (C/P)^p. ISO method, manufacturer’s figure: do not carry it over to another brand. Source: supplier data
C0
3.45 kN
Basic static load rating C0Permissible load without rotation and under shock; ISO 76 method, manufacturer’s figure. Source: supplier data
01

Equivalents

the same size 10 × 35 × 11 from other brands

25 products
Photo: 6300 ZZ C3
You are viewingFAG 6300-ZZ-C3

Same size, different design: the difference is written in the row.
02

Details

what this bearing is, questions

About the bearing

D 35d 10B 11
d×D×Bsize 10 × 35 × 11mm
Cdynamic 8.6kN
C0static 3.45kN

Deep groove ball bearing 6300-ZZ C3, design ZZ: metal shields on both sides.

C, C₀: FAG data. Another brand publishes its own figures, so compare them against that brand’s catalogue.

Frequently asked questions

How does 2RS differ from ZZ?

2RS has rubber seals that touch the inner ring and keep out dust and water better, which is the usual choice for field machinery. ZZ has metal shields that do not touch, allow higher speeds, and protect against dirt less well.

Can I fit another brand instead of this bearing?

Without checking, only an exact equivalent: the size, seal, clearance and design match according to the brand’s catalogue. Positions with the same geometry differ in seal, clearance or design, and each one says so in the equivalents block. Load ratings differ between manufacturers, so for a heavily loaded unit compare C.

How do I get a price and a lead time?

Press “Request a quote” and send the part number and quantity. We reply with the price, availability and delivery terms for your country.

03

Reviews

No reviews yet