+380 50 364 66 46 Mon–Fri 8:00–17:00 Kyiv time Wishlist0 Compare0
Drawing of 623 ZZ: ⌀3 × ⌀10 × 4 mm623 ZZZZ
Fig. 1: 623 ZZ, end view and section; internal parts simplified per ISO 8826-1. Dimensions in mm

There is no photo of this product: the drawing shows the dimensions of 623-ZZ

Load: radial medium; axial low, on both sidesDeep groove ball

Bearing FAG 623-ZZ

Price on request
Available to order
Request a quote

Specifications

Manufacturer number
ISO designation
Equivalents
4 exact, 0 approximate
d
3 mm
Bore diameter dBearing bore = shaft diameter. Source: two supplier sources
D
10 mm
Outside diameter DOutside diameter = housing bore. Source: two supplier sources
B
4 mm
Width BRing width. Source: two supplier sources
Seal
ZZshields, both sides
Clearance
normal clearance
01

Equivalents

the same size 3 × 10 × 4 from other brands

4 products
Series illustration (not a photo of this item): 623 ZZ
You are viewingFAG 623-ZZ

Everything the number specifies matches: ordinary steel, design without special letters. The codes in the number are read against the FAG catalogue.

  • Series illustration (not a photo of this item): 623 ZZ623 ZZThis bearingFAG3 × 10 × 4out of stockon requestyou are here
  • Series illustration (not a photo of this item): 623 ZZ623 ZZCT3 × 10 × 4available to order€0.22Request a quote
  • Series illustration (not a photo of this item): 623 ZZ623 ZZno brand3 × 10 × 4available to orderon requestRequest a quote
  • Series illustration (not a photo of this item): 623 ZZ623 ZZNTE3 × 10 × 4available to orderon requestRequest a quote
02

Details

what this bearing is, questions

About the bearing

D 10d 3B 4
d×D×Bsize 3 × 10 × 4mm

Deep groove ball bearing 623-ZZ, design ZZ: metal shields on both sides.

Frequently asked questions

How does 2RS differ from ZZ?

2RS has rubber seals that touch the inner ring and keep out dust and water better, which is the usual choice for field machinery. ZZ has metal shields that do not touch, allow higher speeds, and protect against dirt less well.

Can I fit another brand instead of this bearing?

Without checking, only an exact equivalent: the size, seal, clearance and design match according to the brand’s catalogue. Positions with the same geometry differ in seal, clearance or design, and each one says so in the equivalents block. Load ratings differ between manufacturers, so for a heavily loaded unit compare C.

How do I get a price and a lead time?

Press “Request a quote” and send the part number and quantity. We reply with the price, availability and delivery terms for your country.

03

Reviews

No reviews yet