+380 50 364 66 46 Mon–Fri 8:00–17:00 Kyiv time Wishlist0 Compare0
Drawing of 6219-2Z: ⌀95 × ⌀170 × 32 mm6219-2Z2Z
Fig. 1: 6219-2Z, end view and section; rolling element geometry per the NSK catalogue. Dimensions in mm

There is no photo of this product: the drawing shows the dimensions of 6219-2Z

Load: radial medium; axial low, on both sidesDeep groove ball

Bearing FAG 6219-2Z

Price on request
Available to order
Request a quote

Specifications

Manufacturer number
ISO designation
GOST number
Equivalents
2 exact, 11 approximate
d
95 mm
Bore diameter dBearing bore = shaft diameter. Source: supplier data
D
170 mm
Outside diameter DOutside diameter = housing bore. Source: supplier data
B
32 mm
Width BRing width. Source: supplier data
Seal
2Zmetal shields on both sides
Clearance
normal clearance
01

Equivalents

the same size 95 × 170 × 32 from other brands

13 products
Series illustration (not a photo of this item): 6219-2Z
You are viewingFAG 6219-2Z

Everything the number specifies matches: series 62, 95 × 170 × 32 mm, metal shields on both sides, normal clearance, ordinary steel, design without special letters. The codes in the number are read against the FAG catalogue.

  • Series illustration (not a photo of this item): 6219-2Z6219-2ZThis bearingFAG95 × 170 × 32available to orderon requestyou are here
  • Series illustration (not a photo of this item): 6219-2Z6219-2ZSKF95 × 170 × 32available to orderon requestRequest a quote
02

Details

what this bearing is, questions

About the bearing

D 170d 95B 32
d×D×Bsize 95 × 170 × 32mm

Deep groove ball bearing 6219-ZZ, design 2Z: metal shields on both sides. Under GOST the same bearing is designated 80219.

Frequently asked questions

How does 2RS differ from ZZ?

2RS has rubber seals that touch the inner ring and keep out dust and water better, which is the usual choice for field machinery. ZZ has metal shields that do not touch, allow higher speeds, and protect against dirt less well.

What is 80219?

It is the same bearing under GOST 3189-89: 8 — metal shields on both sides, 0219 corresponds to the ISO base 6219. Size 95 × 170 × 32 mm, a full equivalent of 6219-ZZ.

Will 6219 2Z C3 fit instead?

Same size, clearance greater than normal. C3 is used where the bearing runs hot or sits on the shaft with an interference fit. If the old bearing is not marked C3, take this one.

Can I fit another brand instead of this bearing?

Without checking, only an exact equivalent: the size, seal, clearance and design match according to the brand’s catalogue. Positions with the same geometry differ in seal, clearance or design, and each one says so in the equivalents block. Load ratings differ between manufacturers, so for a heavily loaded unit compare C.

How do I get a price and a lead time?

Press “Request a quote” and send the part number and quantity. We reply with the price, availability and delivery terms for your country.

03

Reviews

No reviews yet