+380 50 364 66 46 Mon–Fri 8:00–17:00 Kyiv time Wishlist0 Compare0
Prices are in euros. The final price and delivery cost are confirmed in the quote.
Simplified drawing of the bearing per ISO 8826-1, dimensions of 6202 RS: ⌀15 × ⌀35 × 11 mm⌀35⌀15116202 RSRS
Fig. 1: 6202 RS, simplified drawing per ISO 8826-1. Dimensions in mm

There is no photo of this product: the drawing shows the dimensions of 6202-RS

Load: radial medium; axial low, on both sidesDeep groove ball

Bearing FAG 6202-RS

€4.10per piece
Available to orderThe manager confirms the lead time
Request a quote

Specifications

Manufacturer number
ISO designation
GOST number
Equivalents
2 exact, 94 approximate
d
15 mm
Bore diameter dBearing bore = shaft diameter. Source: two supplier sources
D
35 mm
Outside diameter DOutside diameter = housing bore. Source: two supplier sources
B
11 mm
Width BRing width. Source: two supplier sources
Seal
RSrubber, one side
Clearance
normal clearance
C
8.2 kN
Basic dynamic load rating CLoad for one million revolutions at 90 % reliability; the L10 life is calculated from it as (C/P)^p. ISO method, manufacturer’s figure: do not carry it over to another brand. Source: supplier data
C0
3.75 kN
Basic static load rating C0Permissible load without rotation and under shock; ISO 76 method, manufacturer’s figure. Source: supplier data
m
0.045 kg
MassWeight of the product. Source: two supplier sources
01

Equivalents

the same size 15 × 35 × 11 from other brands

98 products
Photo: 6202 RS
You are viewingFAG 6202-RS
€4.10baseline for the price comparison

Everything the number specifies matches: series 62, 15 × 35 × 11 mm, contact seal on one side, normal clearance, ordinary steel, design without special letters. The codes in the number are read against the FAG catalogue.

  • Photo: 6202 RS6202 RSThis bearingFAG15 × 35 × 11available to order€4.10you are here
  • Series illustration (not a photo of this item): 6202 RSH6202 RSHSKF15 × 35 × 11available to orderon requestRequest a quote

Under the price: the difference from the price of this bearing (€4.10).
02

Details

what this bearing is, questions

About the bearing

D 35d 15B 11
d×D×Bsize 15 × 35 × 11mm
Cdynamic 8.2kN
C0static 3.75kN
mweight 0.045kg

Deep groove ball bearing 6202-RS, design RS: contact seal on one side. Under GOST the same bearing is designated 160202.

C, C₀, m: FAG data. Another brand publishes its own figures, so compare them against that brand’s catalogue.

Frequently asked questions

How does 2RS differ from ZZ?

2RS has rubber seals that touch the inner ring and keep out dust and water better, which is the usual choice for field machinery. ZZ has metal shields that do not touch, allow higher speeds, and protect against dirt less well.

What is 160202?

It is the same bearing under GOST 3189-89: 16 — contact seal on one side, 0202 corresponds to the ISO base 6202. Size 15 × 35 × 11 mm, a full equivalent of 6202-RS.

Can I fit another brand instead of this bearing?

Without checking, only an exact equivalent: the size, seal, clearance and design match according to the brand’s catalogue. Positions with the same geometry differ in seal, clearance or design, and each one says so in the equivalents block. Load ratings differ between manufacturers, so for a heavily loaded unit compare C.

How do I get a price and a lead time?

Press “Request a quote” and send the part number and quantity. We reply with the price, availability and delivery terms for your country.

03

Reviews

No reviews yet