+380 50 364 66 46 Mon–Fri 8:00–17:00 Kyiv time Wishlist0 Compare0
Drawing of 6008 C3: ⌀40 × ⌀68 × 15 mm6008 C3
Fig. 1: 6008 C3, end view and section; rolling element geometry per the NSK catalogue. Dimensions in mm

There is no photo of this product: the drawing shows the dimensions of 6008-C3

Load: radial medium; axial low, on both sidesDeep groove ball

Bearing FAG 6008-C3

Price on request
Available to order
Request a quote

Specifications

Manufacturer number
Equivalents
2 exact, 49 approximate
d
40 mm
Bore diameter dBearing bore = shaft diameter. Source: two supplier sources
D
68 mm
Outside diameter DOutside diameter = housing bore. Source: two supplier sources
B
15 mm
Width BRing width. Source: two supplier sources
Seal
open, no protection
Clearance
C3
C
17.8 kN
Basic dynamic load rating CLoad for one million revolutions at 90 % reliability; the L10 life is calculated from it as (C/P)^p. ISO method, manufacturer’s figure: do not carry it over to another brand. Source: supplier data
C0
11.5 kN
Basic static load rating C0Permissible load without rotation and under shock; ISO 76 method, manufacturer’s figure. Source: supplier data
m
0.19 kg
MassWeight of the product. Source: two supplier sources
01

Equivalents

the same size 40 × 68 × 15 from other brands

51 products
Photo: 6008 C3
You are viewingFAG 6008-C3

Everything the number specifies matches: series 60, 40 × 68 × 15 mm, open, no protection, clearance C3, ordinary steel, design without special letters. The codes in the number are read against the FAG catalogue.

  • Photo: 6008 C36008 C3This bearingFAG40 × 68 × 15out of stockon requestyou are here
  • Photo: 6008 C36008 C3Z&S40 × 68 × 15available to order€2.79Request a quote
02

Details

what this bearing is, questions

About the bearing

D 68d 40B 15
d×D×Bsize 40 × 68 × 15mm
Cdynamic 17.8kN
C0static 11.5kN
mweight 0.19kg

Deep groove ball bearing 6008 C3.

C, C₀, m: FAG data. Another brand publishes its own figures, so compare them against that brand’s catalogue.

Frequently asked questions

Can I fit another brand instead of this bearing?

Without checking, only an exact equivalent: the size, seal, clearance and design match according to the brand’s catalogue. Positions with the same geometry differ in seal, clearance or design, and each one says so in the equivalents block. Load ratings differ between manufacturers, so for a heavily loaded unit compare C.

How do I get a price and a lead time?

Press “Request a quote” and send the part number and quantity. We reply with the price, availability and delivery terms for your country.

03

Reviews

No reviews yet