+380 50 364 66 46 Mon–Fri 8:00–17:00 Kyiv time Wishlist0 Compare0
Drawing of 32305 A: ⌀25 × ⌀62 × 25.25 mm⌀62⌀25B 24T 25.25C 20α32305 A
Fig. 1: 32305 A, end view and section; internal parts simplified per ISO 8826-1. Dimensions in mm

There is no photo of this product: the drawing shows the dimensions of 32305-A

Combined load at an angle (tapered, high), axial on one sideTapered roller

Bearing FAG 32305-A

Price on request
Available to order
Request a quote

Specifications

Manufacturer number
ISO designation
GOST number
Equivalents
2 exact, 5 approximate
d
25 mm
Bore diameter dBearing bore = shaft diameter. Source: two supplier sources
D
62 mm
Outside diameter DOutside diameter = housing bore. Source: two supplier sources
B
24 mm
Width BRing width. Source: supplier data
T
25.25 mm
Total width TOverall width of an assembled tapered roller bearing. Source: supplier data
Cup width C
20 mm
Cup width CWidth of the outer ring of a tapered roller bearing. Source: supplier data
m
0.36 kg
MassWeight of the product. Source: supplier data
01

Equivalents

the same size 25 × 62 × 25.25 from other brands

9 products
Photo: 32305 A
You are viewingFAG 32305-A

Everything the number specifies matches: series 323, 25 × 62 × 24 mm, special design. The codes in the number are read against the FAG catalogue.

  • Photo: 32305 A32305 AThis bearingFAG25 × 62 × 24out of stockon requestyou are here
  • Photo: 32305 A32305 AZ&S25 × 62 × 24available to order€5.51Request a quote
02

Details

what this bearing is, questions

About the bearing

d×D×Tsize 25 × 62 × 25.25mm
mweight 0.36kg

Tapered roller bearing 32305. Under GOST the same bearing is designated 7605.

M: FAG data. Another brand publishes its own figures, so compare them against that brand’s catalogue.

Frequently asked questions

What is 7605?

It is the same bearing under GOST 3189-89: 7605 corresponds to the ISO base 32305. Size 25 × 62 × 25.25 mm, a full equivalent of 32305.

Can I fit another brand instead of this bearing?

Without checking, only an exact equivalent: the size, seal, clearance and design match according to the brand’s catalogue. Positions with the same geometry differ in seal, clearance or design, and each one says so in the equivalents block. Load ratings differ between manufacturers, so for a heavily loaded unit compare C.

How do I get a price and a lead time?

Press “Request a quote” and send the part number and quantity. We reply with the price, availability and delivery terms for your country.

03

Reviews

No reviews yet