+380 50 364 66 46 Mon–Fri 8:00–17:00 Kyiv time Wishlist0 Compare0
Prices are in euros. The final price and delivery cost are confirmed in the quote.
Drawing of 31306 A: ⌀30 × ⌀72 × 20.75 mm⌀72⌀30B 19T 20.75C 14α31306 A
Fig. 1: 31306 A, end view and section; internal parts simplified per ISO 8826-1. Dimensions in mm

There is no photo of this product: the drawing shows the dimensions of 31306-A

Combined load at an angle (tapered, high), axial on one sideTapered roller

Bearing FAG 31306-A

€36.34per piece
Available to orderThe manager confirms the lead time
Request a quote

Specifications

Manufacturer number
ISO designation
Equivalents
2 exact, 11 approximate
d
30 mm
Bore diameter dBearing bore = shaft diameter. Source: two supplier sources
D
72 mm
Outside diameter DOutside diameter = housing bore. Source: two supplier sources
B
19 mm
Width BRing width. Source: supplier data
T
20.75 mm
Total width TOverall width of an assembled tapered roller bearing. Source: two supplier sources
Cup width C
14 mm
Cup width CWidth of the outer ring of a tapered roller bearing. Source: supplier data
m
0.39 kg
MassWeight of the product. Source: supplier data
01

Equivalents

the same size 30 × 72 × 20.75 from other brands

15 products
Photo: 31306 A
You are viewingFAG 31306-A
€36.34baseline for the price comparison

Everything the number specifies matches: series 313, 30 × 72 × 19 mm, special design. The codes in the number are read against the FAG catalogue.

  • Photo: 31306 A31306 AThis bearingFAG30 × 72 × 19available to order€36.34you are here
  • Photo: 31306 A31306 AZ&S30 × 72 × 19out of stockon requestRequest a quote

Under the price: the difference from the price of this bearing (€36.34).
02

Details

what this bearing is, questions

About the bearing

d×D×Tsize 30 × 72 × 20.75mm
mweight 0.39kg

Tapered roller bearing 31306.

M: FAG data. Another brand publishes its own figures, so compare them against that brand’s catalogue.

Frequently asked questions

Can I fit another brand instead of this bearing?

Without checking, only an exact equivalent: the size, seal, clearance and design match according to the brand’s catalogue. Positions with the same geometry differ in seal, clearance or design, and each one says so in the equivalents block. Load ratings differ between manufacturers, so for a heavily loaded unit compare C.

How do I get a price and a lead time?

Press “Request a quote” and send the part number and quantity. We reply with the price, availability and delivery terms for your country.

03

Reviews

No reviews yet