+380 50 364 66 46 Mon–Fri 8:00–17:00 Kyiv time Wishlist0 Compare0
Prices are in euros. The final price and delivery cost are confirmed in the quote.
Drawing of 30/8 B-2RS-TVH: ⌀8 × ⌀22 × 11 mm⌀22⌀81130/8 B-2RS-TVH2RS
Fig. 1: 30/8 B-2RS-TVH, end view and section; internal parts simplified per ISO 8826-1. Dimensions in mm

There is no photo of this product: the drawing shows the dimensions of 30/8-B-2RS-TVH

Combined load at an angle (angular contact), axial on one sideAngular contact ball

Bearing FAG 30/8-B-2RS-TVH

€17.27per piece
In stock: 10 pcs
Request a quote

Specifications

Manufacturer number
ISO designation
d
8 mm
Bore diameter dBearing bore = shaft diameter. Source: two supplier sources
D
22 mm
Outside diameter DOutside diameter = housing bore. Source: two supplier sources
B
11 mm
Width BRing width. Source: two supplier sources
Seal
2RSrubber, both sides
C
5.1 kN
Basic dynamic load rating CLoad for one million revolutions at 90 % reliability; the L10 life is calculated from it as (C/P)^p. ISO method, manufacturer’s figure: do not carry it over to another brand. Source: supplier data
C0
2.6 kN
Basic static load rating C0Permissible load without rotation and under shock; ISO 76 method, manufacturer’s figure. Source: supplier data
m
0.022 kg
MassWeight of the product. Source: supplier data
01

Details

what this bearing is, questions

About the bearing

D 22d 8B 11
d×D×Bsize 8 × 22 × 11mm
Cdynamic 5.1kN
C0static 2.6kN
mweight 0.022kg

Angular contact ball bearing 30/8-2RS, design 2RS: contact seals on both sides.

C, C₀, m: FAG data. Another brand publishes its own figures, so compare them against that brand’s catalogue.

Frequently asked questions

How does 2RS differ from ZZ?

2RS has rubber seals that touch the inner ring and keep out dust and water better, which is the usual choice for field machinery. ZZ has metal shields that do not touch, allow higher speeds, and protect against dirt less well.

Can I fit another brand instead of this bearing?

Without checking, only an exact equivalent: the size, seal, clearance and design match according to the brand’s catalogue. Positions with the same geometry differ in seal, clearance or design, and each one says so in the equivalents block. Load ratings differ between manufacturers, so for a heavily loaded unit compare C.

How do I get a price and a lead time?

Press “Request a quote” and send the part number and quantity. We reply with the price, availability and delivery terms for your country.

02

Reviews

No reviews yet