+380 50 364 66 46 Mon–Fri 8:00–17:00 Kyiv time Wishlist0 Compare0
Prices are in euros. The final price and delivery cost are confirmed in the quote.
Drawing of 2208 2RS TVH: ⌀40 × ⌀80 × 23 mm⌀80⌀40232208 2RS TVH2RS
Fig. 1: 2208 2RS TVH, end view and section; internal parts simplified per ISO 8826-1. Dimensions in mm
Bearing FAG 2208 2RS TVH — photo 1
Load: radial medium; axial low, on both sidesSelf-aligning ball

Bearing FAG 2208-2RS-TVH

€47.39per piece
Available to orderThe manager confirms the lead time
Request a quote

Specifications

Manufacturer number
ISO designation
Equivalents
1 exact, 18 approximate
d
40 mm
Bore diameter dBearing bore = shaft diameter. Source: two supplier sources
D
80 mm
Outside diameter DOutside diameter = housing bore. Source: two supplier sources
B
23 mm
Width BRing width. Source: two supplier sources
Seal
2RSrubber, both sides
Clearance
normal clearance
C
19.4 kN
Basic dynamic load rating CLoad for one million revolutions at 90 % reliability; the L10 life is calculated from it as (C/P)^p. ISO method, manufacturer’s figure: do not carry it over to another brand. Source: two supplier sources
C0
6.5 kN
Basic static load rating C0Permissible load without rotation and under shock; ISO 76 method, manufacturer’s figure. Source: two supplier sources
m
0.51 kg
MassWeight of the product. Source: two supplier sources
01

Equivalents

the same size 40 × 80 × 23 from other brands

20 products
Photo: 2208 2RS TVH
You are viewingFAG 2208-2RS-TVH
€47.39baseline for the price comparison

Same size, different design: the difference is written in the row.

  • Series illustration (not a photo of this item): 2208 2RS2208 2RSstandard designCT40 × 80 × 2369 pcs€3.11−€44.28Request a quote
  • Series illustration (not a photo of this item): 2208 2RS2208 2RSstandard designno brand40 × 80 × 23available to orderon requestRequest a quote
  • Cross-section drawing to size: Self-aligning ball, 40 × 80 × 23 mmSS 2208 2RSstainless steelMGK40 × 80 × 23available to orderon requestRequest a quote
  • Cross-section drawing to size: Self-aligning ball, 40 × 80 × 23 mm2208 2RSTNGTNGNEUWEG40 × 80 × 23available to orderon requestRequest a quote
  • Cross-section drawing to size: Self-aligning ball, 40 × 80 × 23 mm2208-2RSTNG N AR3N5TNG, groove for a snap ring, AR3N5: not decodedNSK40 × 80 × 23available to orderon requestRequest a quote
  • Cross-section drawing to size: Self-aligning ball, 40 × 80 × 23 mm2208 2RSTNGC3clearance C3, TNGNSK40 × 80 × 23available to orderon requestRequest a quote
  • Cross-section drawing to size: Self-aligning ball, 40 × 80 × 23 mm2208K-2RSTNG N AR3N5TNG, groove for a snap ring, 1:12 tapered bore, AR3N5: not decodedNSK40 × 80 × 23available to orderon requestRequest a quote
  • Cross-section drawing to size: Self-aligning ball, 40 × 80 × 23 mm2208 E-2RS1KTN9different cage, E, 1:12 tapered boreSKF40 × 80 × 23available to orderon requestRequest a quote
  • Cross-section drawing to size: Self-aligning ball, 40 × 80 × 23 mm2208 E-2RS1KTN9/C3clearance C3, different cage, E, 1:12 tapered boreSKF40 × 80 × 23available to orderon requestRequest a quote
  • Series illustration (not a photo of this item): 2208 E-2RS1TN92208 E-2RS1TN9different cage, ESKF40 × 80 × 23available to orderon requestRequest a quote

Under the price: the difference from the price of this bearing (€47.39).
02

Details

what this bearing is, questions

About the bearing

d×D×Bsize 40 × 80 × 23mm
Cdynamic 19.4kN
C0static 6.5kN
mweight 0.51kg

Self-aligning ball bearing 2208-2RS, design 2RS: contact seals on both sides.

C, C₀, m: FAG data. Another brand publishes its own figures, so compare them against that brand’s catalogue.

Frequently asked questions

How does 2RS differ from ZZ?

2RS has rubber seals that touch the inner ring and keep out dust and water better, which is the usual choice for field machinery. ZZ has metal shields that do not touch, allow higher speeds, and protect against dirt less well.

Can I fit another brand instead of this bearing?

Without checking, only an exact equivalent: the size, seal, clearance and design match according to the brand’s catalogue. Positions with the same geometry differ in seal, clearance or design, and each one says so in the equivalents block. Load ratings differ between manufacturers, so for a heavily loaded unit compare C.

How do I get a price and a lead time?

Press “Request a quote” and send the part number and quantity. We reply with the price, availability and delivery terms for your country.

03

Reviews

No reviews yet