+380 50 364 66 46 Mon–Fri 8:00–17:00 Kyiv time Wishlist0 Compare0
DYZV
Drawing of 22230MBW33: ⌀150 × ⌀270 × 73 mm⌀270⌀1507322230MBW33
Fig. 1: 22230MBW33, end view and section; internal parts simplified per ISO 8826-1. Dimensions in mm

There is no photo of this product: the drawing shows the dimensions of 22230MBW33

Load: radial high; axial medium, on both sidesSpherical roller

Bearing DYZV 22230MBW33

Price on request
Available to order
Request a quote

Specifications

Manufacturer number
ISO designation
GOST number
Equivalents
3 exact, 14 approximate
d
150 mm
Bore diameter dBearing bore = shaft diameter. Source: supplier data
D
270 mm
Outside diameter DOutside diameter = housing bore. Source: supplier data
B
73 mm
Width BRing width. Source: supplier data
Seal
open, no protection
Clearance
normal clearance
01

Equivalents

the same size 150 × 270 × 73 from other brands

18 products
Cross-section drawing to size: Spherical roller, 150 × 270 × 73 mm
You are viewingDYZV 22230MBW33

Everything the number specifies matches: series 222, 150 × 270 × 73 mm, open, no protection, normal clearance, special design. The codes in the number are read against the DYZV catalogue.

  • Cross-section drawing to size: Spherical roller, 150 × 270 × 73 mm22230MBW33This bearingDYZV150 × 270 × 73available to orderon requestyou are here
  • Cross-section drawing to size: Spherical roller, 150 × 270 × 73 mm22230 MBW33NTE150 × 270 × 73available to order€142.53Request a quote
  • Cross-section drawing to size: Spherical roller, 150 × 270 × 73 mm22230 MBW33KG150 × 270 × 73available to orderon requestRequest a quote
02

Details

what this bearing is, questions

About the bearing

d×D×Bsize 150 × 270 × 73mm

Spherical roller bearing 22230. Under GOST the same bearing is designated 3530.

Frequently asked questions

What is 3530?

It is the same bearing under GOST 3189-89: 3530 corresponds to the ISO base 22230. Size 150 × 270 × 73 mm, a full equivalent of 22230.

Will 22230 C3 fit instead?

Same size, clearance greater than normal. C3 is used where the bearing runs hot or sits on the shaft with an interference fit. If the old bearing is not marked C3, take this one.

Can I fit another brand instead of this bearing?

Without checking, only an exact equivalent: the size, seal, clearance and design match according to the brand’s catalogue. Positions with the same geometry differ in seal, clearance or design, and each one says so in the equivalents block. Load ratings differ between manufacturers, so for a heavily loaded unit compare C.

How do I get a price and a lead time?

Press “Request a quote” and send the part number and quantity. We reply with the price, availability and delivery terms for your country.

03

Reviews

No reviews yet