+380 50 364 66 46 Mon–Fri 8:00–17:00 Kyiv time Wishlist0 Compare0
DPI
Drawing of 6019 2RS: ⌀95 × ⌀145 × 24 mm6019 2RS2RS
Fig. 1: 6019 2RS, end view and section; rolling element geometry per the NSK catalogue. Dimensions in mm

There is no photo of this product: the drawing shows the dimensions of 6019 2RS

Load: radial medium; axial low, on both sidesDeep groove ball

Bearing DPI 6019 2RS

Price on request
Available to order
Request a quote

Specifications

Manufacturer number
ISO designation
GOST number
Equivalents
6 exact, 9 approximate
d
95 mm
Bore diameter dBearing bore = shaft diameter. Source: two supplier sources
D
145 mm
Outside diameter DOutside diameter = housing bore. Source: two supplier sources
B
24 mm
Width BRing width. Source: two supplier sources
Seal
2RSrubber, both sides
Clearance
normal clearance
m
1.2 kg
MassWeight of the product. Source: supplier data
01

Equivalents

the same size 95 × 145 × 24 from other brands

15 products
Series illustration (not a photo of this item): 6019 2RS
You are viewingDPI 6019 2RS

Everything the number specifies matches: series 60, 95 × 145 × 24 mm, contact seals on both sides, normal clearance, ordinary steel, design without special letters. The codes in the number are read against the DPI catalogue.
02

Details

what this bearing is, questions

About the bearing

D 145d 95B 24
d×D×Bsize 95 × 145 × 24mm
mweight 1.2kg

Deep groove ball bearing 6019-2RS, design 2RS: contact seals on both sides. Under GOST the same bearing is designated 180119.

M: DPI data. Another brand publishes its own figures, so compare them against that brand’s catalogue.

Frequently asked questions

How does 2RS differ from ZZ?

2RS has rubber seals that touch the inner ring and keep out dust and water better, which is the usual choice for field machinery. ZZ has metal shields that do not touch, allow higher speeds, and protect against dirt less well.

What is 180119?

It is the same bearing under GOST 3189-89: 18 — contact seals on both sides, 0119 corresponds to the ISO base 6019. Size 95 × 145 × 24 mm, a full equivalent of 6019-2RS.

Can I fit another brand instead of this bearing?

Without checking, only an exact equivalent: the size, seal, clearance and design match according to the brand’s catalogue. Positions with the same geometry differ in seal, clearance or design, and each one says so in the equivalents block. Load ratings differ between manufacturers, so for a heavily loaded unit compare C.

How do I get a price and a lead time?

Press “Request a quote” and send the part number and quantity. We reply with the price, availability and delivery terms for your country.

03

Reviews

No reviews yet