+380 50 364 66 46 Mon–Fri 8:00–17:00 Kyiv time Wishlist0 Compare0
Prices are in euros. The final price and delivery cost are confirmed in the quote.
Drawing of NUP 2212: ⌀60 × ⌀110 × 28 mm⌀110⌀6028NUP 2212
Fig. 1: NUP 2212, end view and section; internal parts simplified per ISO 8826-1. Dimensions in mm

There is no photo of this product: the drawing shows the dimensions of NUP 2212

Load: radial high; axial low, on both sidesCylindrical roller NUP

Bearing DKF NUP 2212

€45.86per piece
Available to orderThe manager confirms the lead time
Request a quote

Specifications

Manufacturer number
OEM number
40 RT 22
Equivalents
3 exact, 12 approximate
d
60 mm
Bore diameter dBearing bore = shaft diameter. Source: two supplier sources
D
110 mm
Outside diameter DOutside diameter = housing bore. Source: two supplier sources
B
28 mm
Width BRing width. Source: two supplier sources
Seal
open, no protection
Clearance
normal clearance
m
1.12 kg
MassWeight of the product. Source: supplier data
01

Equivalents

the same size 60 × 110 × 28 from other brands

15 products
Photo: NUP 2212
You are viewingDKF NUP 2212
€45.86baseline for the price comparison

Size and design match across the brand catalogues. The codes in the number are read against the DKF catalogue.

  • Photo: NUP 2212NUP 2212This bearingDKF60 × 110 × 28available to order€45.86you are here
  • Cross-section drawing to size: Cylindrical roller NUP, 60 × 110 × 28 mmNUP 2212CT60 × 110 × 287 pcs€6.72−€39.14Request a quote
  • Cross-section drawing to size: Cylindrical roller NUP, 60 × 110 × 28 mmNUP 2212 E.TVP2FAG60 × 110 × 28available to orderon requestRequest a quote

Under the price: the difference from the price of this bearing (€45.86).
02

Details

what this bearing is, questions

About the bearing

d×D×Bsize 60 × 110 × 28mm
mweight 1.12kg

Cylindrical roller NUP bearing NUP 2212.

M: DKF data. Another brand publishes its own figures, so compare them against that brand’s catalogue.

Frequently asked questions

Will 2212 C3 fit instead?

Same size, clearance greater than normal. C3 is used where the bearing runs hot or sits on the shaft with an interference fit. If the old bearing is not marked C3, take this one.

Can I fit another brand instead of this bearing?

Without checking, only an exact equivalent: the size, seal, clearance and design match according to the brand’s catalogue. Positions with the same geometry differ in seal, clearance or design, and each one says so in the equivalents block. Load ratings differ between manufacturers, so for a heavily loaded unit compare C.

How do I get a price and a lead time?

Press “Request a quote” and send the part number and quantity. We reply with the price, availability and delivery terms for your country.

03

Reviews

No reviews yet