+380 50 364 66 46 Mon–Fri 8:00–17:00 Kyiv time Wishlist0 Compare0
Drawing of NU 1014: ⌀70 × ⌀110 × 20 mm⌀110⌀7020NU 1014
Fig. 1: NU 1014, end view and section; internal parts simplified per ISO 8826-1. Dimensions in mm

There is no photo of this product: the drawing shows the dimensions of NU 1014

Load: radial high; no axial loadCylindrical roller NU

Bearing DKF NU 1014

Price on request
Available to order
Request a quote

Specifications

Manufacturer number
Equivalents
2 exact, 1 approximate
d
70 mm
Bore diameter dBearing bore = shaft diameter. Source: two supplier sources
D
110 mm
Outside diameter DOutside diameter = housing bore. Source: two supplier sources
B
20 mm
Width BRing width. Source: two supplier sources
Seal
open, no protection
Clearance
normal clearance
m
0.706 kg
MassWeight of the product. Source: supplier data
01

Equivalents

the same size 70 × 110 × 20 from other brands

3 products
Cross-section drawing to size: Cylindrical roller NU, 70 × 110 × 20 mm
You are viewingDKF NU 1014

Size and design match across the brand catalogues. The codes in the number are read against the DKF catalogue.

  • Cross-section drawing to size: Cylindrical roller NU, 70 × 110 × 20 mmNU 1014This bearingDKF70 × 110 × 20out of stockon requestyou are here
  • Cross-section drawing to size: Cylindrical roller NU, 70 × 110 × 20 mmNU 1014 XL-M1FAG70 × 110 × 20available to orderon requestRequest a quote
02

Details

what this bearing is, questions

About the bearing

d×D×Bsize 70 × 110 × 20mm
mweight 0.706kg

Cylindrical roller NU bearing NU 1014.

M: DKF data. Another brand publishes its own figures, so compare them against that brand’s catalogue.

Frequently asked questions

Will 1014 C3 fit instead?

Same size, clearance greater than normal. C3 is used where the bearing runs hot or sits on the shaft with an interference fit. If the old bearing is not marked C3, take this one.

Can I fit another brand instead of this bearing?

Without checking, only an exact equivalent: the size, seal, clearance and design match according to the brand’s catalogue. Positions with the same geometry differ in seal, clearance or design, and each one says so in the equivalents block. Load ratings differ between manufacturers, so for a heavily loaded unit compare C.

How do I get a price and a lead time?

Press “Request a quote” and send the part number and quantity. We reply with the price, availability and delivery terms for your country.

03

Reviews

No reviews yet