+380 50 364 66 46 Mon–Fri 8:00–17:00 Kyiv time Wishlist0 Compare0
Drawing of 608: ⌀8 × ⌀22 × 7 mm608
Fig. 1: 608, end view and section; internal parts simplified per ISO 8826-1. Dimensions in mm

There is no photo of this product: the drawing shows the dimensions of 608

Load: radial medium; axial low, on both sidesDeep groove ball

Bearing DKF 608

Price on request
Available to order
Request a quote

Specifications

Manufacturer number
GOST number
Equivalents
4 exact, 0 approximate
d
8 mm
Bore diameter dBearing bore = shaft diameter. Source: two supplier sources
D
22 mm
Outside diameter DOutside diameter = housing bore. Source: two supplier sources
B
7 mm
Width BRing width. Source: two supplier sources
Seal
open, no protection
Clearance
normal clearance
m
0.012 kg
MassWeight of the product. Source: supplier data
01

Equivalents

the same size 8 × 22 × 7 from other brands

4 products
Series illustration (not a photo of this item): 608
You are viewingDKF 608

Everything the number specifies matches: ordinary steel, design without special letters. The codes in the number are read against the DKF catalogue.

  • Series illustration (not a photo of this item): 608608This bearingDKF8 × 22 × 7out of stockon requestyou are here
  • Series illustration (not a photo of this item): 608608CT8 × 22 × 7190 pcs€0.16Request a quote
  • Photo: 608608SKF8 × 22 × 7available to order€1.32Request a quote
  • Series illustration (not a photo of this item): 608608KG8 × 22 × 7available to orderon requestRequest a quote
02

Details

what this bearing is, questions

About the bearing

D 22d 8B 7
d×D×Bsize 8 × 22 × 7mm
mweight 0.012kg

Deep groove ball bearing 608. Under GOST the same bearing is designated 18.

M: DKF data. Another brand publishes its own figures, so compare them against that brand’s catalogue.

Frequently asked questions

What is 18?

It is the same bearing under GOST 3189-89: 18 corresponds to the ISO base 608. Size 8 × 22 × 7 mm, a full equivalent of 608.

Can I fit another brand instead of this bearing?

Without checking, only an exact equivalent: the size, seal, clearance and design match according to the brand’s catalogue. Positions with the same geometry differ in seal, clearance or design, and each one says so in the equivalents block. Load ratings differ between manufacturers, so for a heavily loaded unit compare C.

How do I get a price and a lead time?

Press “Request a quote” and send the part number and quantity. We reply with the price, availability and delivery terms for your country.

03

Reviews

No reviews yet