+380 50 364 66 46 Mon–Fri 8:00–17:00 Kyiv time Wishlist0 Compare0
Drawing of 16024: ⌀120 × ⌀180 × 19 mm16024
Fig. 1: 16024, end view and section; rolling element geometry per the NSK catalogue. Dimensions in mm

There is no photo of this product: the drawing shows the dimensions of 16024

Load: radial medium; axial low, on both sidesDeep groove ball

Bearing DKF 16024

Price on request
Available to order
Request a quote

Specifications

Manufacturer number
GOST number
Equivalents
4 exact, 0 approximate
d
120 mm
Bore diameter dBearing bore = shaft diameter. Source: two supplier sources
D
180 mm
Outside diameter DOutside diameter = housing bore. Source: two supplier sources
B
19 mm
Width BRing width. Source: two supplier sources
Seal
open, no protection
Clearance
normal clearance
m
1.62 kg
MassWeight of the product. Source: supplier data
01

Equivalents

the same size 120 × 180 × 19 from other brands

5 products
Series illustration (not a photo of this item): 16024
You are viewingDKF 16024

Everything the number specifies matches: series 160, 120 × 180 × 19 mm, open, no protection, normal clearance, ordinary steel, design without special letters. The codes in the number are read against the DKF catalogue.

  • Series illustration (not a photo of this item): 1602416024This bearingDKF120 × 180 × 19out of stockon requestyou are here
  • Series illustration (not a photo of this item): 1602416024CT120 × 180 × 1930 pcs€11.12Request a quote
  • Series illustration (not a photo of this item): 1602416024no brand120 × 180 × 19available to orderon requestRequest a quote
  • Series illustration (not a photo of this item): 1602416024FAG120 × 180 × 19available to orderon requestRequest a quote
02

Details

what this bearing is, questions

About the bearing

D 180d 120B 19
d×D×Bsize 120 × 180 × 19mm
mweight 1.62kg

Deep groove ball bearing 16024. Under GOST the same bearing is designated 7000124.

M: DKF data. Another brand publishes its own figures, so compare them against that brand’s catalogue.

Frequently asked questions

What is 7000124?

It is the same bearing under GOST 3189-89: 7000124 corresponds to the ISO base 16024. Size 120 × 180 × 19 mm, a full equivalent of 16024.

Can I fit another brand instead of this bearing?

Without checking, only an exact equivalent: the size, seal, clearance and design match according to the brand’s catalogue. Positions with the same geometry differ in seal, clearance or design, and each one says so in the equivalents block. Load ratings differ between manufacturers, so for a heavily loaded unit compare C.

How do I get a price and a lead time?

Press “Request a quote” and send the part number and quantity. We reply with the price, availability and delivery terms for your country.

03

Reviews

No reviews yet