+380 50 364 66 46 Mon–Fri 8:00–17:00 Kyiv time Wishlist0 Compare0
Prices are in euros. The final price and delivery cost are confirmed in the quote.
Drawing of SS 6211 2RS: ⌀55 × ⌀100 × 21 mmSS 6211 2RS2RS
Fig. 1: SS 6211 2RS, end view and section; rolling element geometry per the NSK catalogue. Dimensions in mm

There is no photo of this product: the drawing shows the dimensions of SS 6211 2RS

Load: radial medium; axial low, on both sidesDeep groove ball

Bearing CT SS 6211 2RS

€10.05per piece
In stock: 19 pcs
Request a quote

Specifications

Manufacturer number
ISO designation
Equivalents
1 exact, 47 approximate
d
55 mm
Bore diameter dBearing bore = shaft diameter. Source: two supplier sources
D
100 mm
Outside diameter DOutside diameter = housing bore. Source: two supplier sources
B
21 mm
Width BRing width. Source: two supplier sources
Seal
2RSrubber, both sides
Clearance
normal clearance
01

Equivalents

the same size 55 × 100 × 21 from other brands

48 products
Drawing: SS 6211 2RS
You are viewingCT SS 6211 2RS
€10.05baseline for the price comparison

Same size, different design: the difference is written in the row.

  • Series illustration (not a photo of this item): 6211 ZZ6211 ZZmetal shields on both sides, ordinary steelNTE55 × 100 × 21100 pcs€4.23−€5.82Request a quote
  • Photo: 6211 ZZ6211 ZZmetal shields on both sides, ordinary steelCT55 × 100 × 21available to order€2.43−€7.62Request a quote
  • Photo: 6211 ZZ6211 ZZmetal shields on both sides, ordinary steelROM55 × 100 × 21available to order€4.23−€5.82Request a quote
  • Photo: 6211 ZZ6211 ZZmetal shields on both sides, ordinary steelZ&S55 × 100 × 21available to order€7.13−€2.92Request a quote
  • Photo: 6211 2Z/C36211 2Z/C3metal shields on both sides, clearance C3, ordinary steelSKF55 × 100 × 21available to order€12.90+€2.85Request a quote
  • Photo: 6211-2Z6211-2Zmetal shields on both sides, ordinary steelSKF55 × 100 × 21available to order€13.58+€3.53Request a quote
  • Series illustration (not a photo of this item): 6211 ZZ6211 ZZmetal shields on both sides, ordinary steelno brand55 × 100 × 21available to orderon requestRequest a quote
  • Type diagram, no dimensions: ball6211 BHTS ZZ 350 BECO PLUSmetal shields on both sides, BHTS, 350, BECO, PLUS: not decodedBECO55 × 100 × ?available to orderon requestRequest a quote
  • Cross-section drawing to size: Deep groove ball, 55 × 100 × 21 mm6211 Zshield on one side, ordinary steelCT55 × 100 × 21available to orderon requestRequest a quote
  • Series illustration (not a photo of this item): 6211-2Z6211-2Zmetal shields on both sides, ordinary steelFAG55 × 100 × 21available to orderon requestRequest a quote

Under the price: the difference from the price of this bearing (€10.05).
02

Details

what this bearing is, questions

About the bearing

D 100d 55B 21
d×D×Bsize 55 × 100 × 21mm

Deep groove ball bearing 6211-2RS SS, design 2RS: contact seals on both sides.

Frequently asked questions

How does 2RS differ from ZZ?

2RS has rubber seals that touch the inner ring and keep out dust and water better, which is the usual choice for field machinery. ZZ has metal shields that do not touch, allow higher speeds, and protect against dirt less well.

Will 6211 2RS C3 fit instead?

Same size, clearance greater than normal. C3 is used where the bearing runs hot or sits on the shaft with an interference fit. If the old bearing is not marked C3, take this one.

Can I fit another brand instead of this bearing?

Without checking, only an exact equivalent: the size, seal, clearance and design match according to the brand’s catalogue. Positions with the same geometry differ in seal, clearance or design, and each one says so in the equivalents block. Load ratings differ between manufacturers, so for a heavily loaded unit compare C.

How do I get a price and a lead time?

Press “Request a quote” and send the part number and quantity. We reply with the price, availability and delivery terms for your country.

03

Reviews

No reviews yet