+380 50 364 66 46 Mon–Fri 8:00–17:00 Kyiv time Wishlist0 Compare0
Prices are in euros. The final price and delivery cost are confirmed in the quote.
Drawing of NN 3010 K: ⌀50 × ⌀80 × 23 mm⌀80⌀5023NN 3010 K
Fig. 1: NN 3010 K, end view and section; internal parts simplified per ISO 8826-1. Dimensions in mm

There is no photo of this product: the drawing shows the dimensions of NN 3010 K

Load: radial high; no axial loadCylindrical roller

Bearing CT NN 3010 K

€8.77per piece
In stock: 11 pcs
Request a quote

Specifications

Manufacturer number
Equivalents
0 exact, 0 approximate
d
50 mm
Bore diameter dBearing bore = shaft diameter. Source: two supplier sources
D
80 mm
Outside diameter DOutside diameter = housing bore. Source: two supplier sources
B
23 mm
Width BRing width. Source: two supplier sources
Seal
open, no protection
Clearance
normal clearance
C
57 kN
Basic dynamic load rating CLoad for one million revolutions at 90 % reliability; the L10 life is calculated from it as (C/P)^p. ISO method, manufacturer’s figure: do not carry it over to another brand. Source: supplier data
01

Equivalents

the same size 50 × 80 × 23 from other brands

2 products
Cross-section drawing to size: Cylindrical roller, 50 × 80 × 23 mm
You are viewingCT NN 3010 K
€8.77baseline for the price comparison

Not enough data for a firm conclusion: what is missing is written in the row.

  • Cross-section drawing to size: Cylindrical roller, 50 × 80 × 23 mmNN 3010 KThis bearingCT50 × 80 × 2311 pcs€8.77you are here
  • Type diagram, no dimensions: rollerNN 3010-D-K-TVP-SP-XLD: not decodedFAG50 × 80 × ?available to orderon requestRequest a quote

Under the price: the difference from the price of this bearing (€8.77).
02

Details

what this bearing is, questions

About the bearing

d×D×Bsize 50 × 80 × 23mm
Cdynamic 57kN

Cylindrical roller bearing NN 3010 K.

C: CT data. Another brand publishes its own figures, so compare them against that brand’s catalogue.

Frequently asked questions

Can I fit another brand instead of this bearing?

Without checking, only an exact equivalent: the size, seal, clearance and design match according to the brand’s catalogue. Positions with the same geometry differ in seal, clearance or design, and each one says so in the equivalents block. Load ratings differ between manufacturers, so for a heavily loaded unit compare C.

How do I get a price and a lead time?

Press “Request a quote” and send the part number and quantity. We reply with the price, availability and delivery terms for your country.

03

Reviews

No reviews yet