+380 50 364 66 46 Mon–Fri 8:00–17:00 Kyiv time Wishlist0 Compare0
Drawing of NJ2326M: ⌀130 × ⌀280 × 93 mm⌀280⌀13093NJ2326M
Fig. 1: NJ2326M, end view and section; internal parts simplified per ISO 8826-1. Dimensions in mm

There is no photo of this product: the drawing shows the dimensions of NJ2326M

Load: radial high; axial low, on one sideCylindrical roller NJ

Bearing CT NJ2326M

Price on request
Available to order
Request a quote

Specifications

Manufacturer number
Equivalents
1 exact, 3 approximate
d
130 mm
Bore diameter dBearing bore = shaft diameter. Source: supplier data
D
280 mm
Outside diameter DOutside diameter = housing bore. Source: supplier data
B
93 mm
Width BRing width. Source: supplier data
Seal
open, no protection
Clearance
normal clearance
01

Equivalents

the same size 130 × 280 × 93 from other brands

4 products
Cross-section drawing to size: Cylindrical roller NJ, 130 × 280 × 93 mm
You are viewingCT NJ2326M

Same size, different design: the difference is written in the row.

  • Cross-section drawing to size: Cylindrical roller N, 130 × 280 × 93 mmN2326 Mdifferent designCT130 × 280 × 93available to orderon requestRequest a quote
  • Cross-section drawing to size: Cylindrical roller NU, 130 × 280 × 93 mmNU 2326 ECML/C4clearance C4, reinforced design EC, MLSKF130 × 280 × 93available to orderon requestRequest a quote
  • Cross-section drawing to size: Cylindrical roller, 130 × 280 × 93 mmSL 192326 C3clearance C3, SL: not decodedNEU130 × 280 × 93available to order€633.47Request a quote
02

Details

what this bearing is, questions

About the bearing

d×D×Bsize 130 × 280 × 93mm

Cylindrical roller NJ bearing NJ2326M.

Frequently asked questions

Will 2326 C3 fit instead?

Same size, clearance greater than normal. C3 is used where the bearing runs hot or sits on the shaft with an interference fit. If the old bearing is not marked C3, take this one.

Can I fit another brand instead of this bearing?

Without checking, only an exact equivalent: the size, seal, clearance and design match according to the brand’s catalogue. Positions with the same geometry differ in seal, clearance or design, and each one says so in the equivalents block. Load ratings differ between manufacturers, so for a heavily loaded unit compare C.

How do I get a price and a lead time?

Press “Request a quote” and send the part number and quantity. We reply with the price, availability and delivery terms for your country.

03

Reviews

No reviews yet