+380 50 364 66 46 Mon–Fri 8:00–17:00 Kyiv time Wishlist0 Compare0
Prices are in euros. The final price and delivery cost are confirmed in the quote.
Drawing of NJ224: ⌀120 × ⌀215 × 40 mm⌀215⌀12040NJ224
Fig. 1: NJ224, end view and section; internal parts simplified per ISO 8826-1. Dimensions in mm

There is no photo of this product: the drawing shows the dimensions of NJ224

Load: radial high; axial low, on one sideCylindrical roller NJ

Bearing CT NJ224

€20.03per piece
In stock: 10 pcs
Request a quote

Specifications

Manufacturer number
Equivalents
6 exact, 8 approximate
d
120 mm
Bore diameter dBearing bore = shaft diameter. Source: two supplier sources
D
215 mm
Outside diameter DOutside diameter = housing bore. Source: two supplier sources
B
40 mm
Width BRing width. Source: two supplier sources
Seal
open, no protection
Clearance
normal clearance
01

Equivalents

the same size 120 × 215 × 40 from other brands

14 products
Cross-section drawing to size: Cylindrical roller NJ, 120 × 215 × 40 mm
You are viewingCT NJ224
€20.03baseline for the price comparison

Size and design match across the brand catalogues. The codes in the number are read against the CT catalogue.

  • Cross-section drawing to size: Cylindrical roller NJ, 120 × 215 × 40 mmNJ224This bearingCT120 × 215 × 4010 pcs€20.03you are here
  • Cross-section drawing to size: Cylindrical roller NJ, 120 × 215 × 40 mmNJ224EMDYZV120 × 215 × 40available to orderon requestRequest a quote
  • Cross-section drawing to size: Cylindrical roller NJ, 120 × 215 × 40 mmNJ 224 WNSK120 × 215 × 40available to orderon requestRequest a quote
  • Cross-section drawing to size: Cylindrical roller NJ, 120 × 215 × 40 mmNJ 224 ECJSKF120 × 215 × 40available to orderon requestRequest a quote
  • Cross-section drawing to size: Cylindrical roller NJ, 120 × 215 × 40 mmNJ224 EMURB120 × 215 × 40available to orderon requestRequest a quote
  • Series illustration (not a photo of this item): NJ 224 ENJ 224 EZVL120 × 215 × 40available to orderon requestRequest a quote

Under the price: the difference from the price of this bearing (€20.03).
02

Details

what this bearing is, questions

About the bearing

d×D×Bsize 120 × 215 × 40mm

Cylindrical roller NJ bearing NJ224.

Frequently asked questions

Will 224 C3 fit instead?

Same size, clearance greater than normal. C3 is used where the bearing runs hot or sits on the shaft with an interference fit. If the old bearing is not marked C3, take this one.

Can I fit another brand instead of this bearing?

Without checking, only an exact equivalent: the size, seal, clearance and design match according to the brand’s catalogue. Positions with the same geometry differ in seal, clearance or design, and each one says so in the equivalents block. Load ratings differ between manufacturers, so for a heavily loaded unit compare C.

How do I get a price and a lead time?

Press “Request a quote” and send the part number and quantity. We reply with the price, availability and delivery terms for your country.

03

Reviews

No reviews yet