+380 50 364 66 46 Mon–Fri 8:00–17:00 Kyiv time Wishlist0 Compare0
Prices are in euros. The final price and delivery cost are confirmed in the quote.
Drawing of NJ 306: ⌀30 × ⌀72 × 19 mm⌀72⌀3019NJ 306
Fig. 1: NJ 306, end view and section; internal parts simplified per ISO 8826-1. Dimensions in mm

There is no photo of this product: the drawing shows the dimensions of NJ 306

Load: radial high; axial low, on one sideCylindrical roller NJ

Bearing CT NJ 306

€3.02per piece
In stock: 22 pcs
Request a quote

Specifications

Manufacturer number
Equivalents
8 exact, 17 approximate
d
30 mm
Bore diameter dBearing bore = shaft diameter. Source: two supplier sources
D
72 mm
Outside diameter DOutside diameter = housing bore. Source: two supplier sources
B
19 mm
Width BRing width. Source: two supplier sources
Seal
open, no protection
Clearance
normal clearance
C
58.5 kN
Basic dynamic load rating CLoad for one million revolutions at 90 % reliability; the L10 life is calculated from it as (C/P)^p. ISO method, manufacturer’s figure: do not carry it over to another brand. Source: supplier data
C0
48 kN
Basic static load rating C0Permissible load without rotation and under shock; ISO 76 method, manufacturer’s figure. Source: supplier data
m
0.41 kg
MassWeight of the product. Source: supplier data
01

Equivalents

the same size 30 × 72 × 19 from other brands

28 products
Cross-section drawing to size: Cylindrical roller NJ, 30 × 72 × 19 mm
You are viewingCT NJ 306
€3.02baseline for the price comparison

Size and design match across the brand catalogues. The codes in the number are read against the CT catalogue.

  • Cross-section drawing to size: Cylindrical roller NJ, 30 × 72 × 19 mmNJ 306This bearingCT30 × 72 × 1922 pcs€3.02you are here
  • Photo: NJ 306 ENJ 306 EZ&S30 × 72 × 19available to order€11+€7.98Request a quote
  • Cross-section drawing to size: Cylindrical roller NJ, 30 × 72 × 19 mmNJ 306 E M1FAG30 × 72 × 19available to orderon requestRequest a quote
  • Cross-section drawing to size: Cylindrical roller NJ, 30 × 72 × 19 mmNJ 306 E-XL-M1AFAG30 × 72 × 19available to orderon requestRequest a quote
  • Series illustration (not a photo of this item): NJ 306 ENJ 306 EKG30 × 72 × 19available to orderon requestRequest a quote
  • Series illustration (not a photo of this item): NJ 306 ENJ 306 Eno brand30 × 72 × 19available to orderon requestRequest a quote
  • Series illustration (not a photo of this item): NJ 306 ENJ 306 ENTE30 × 72 × 19available to orderon requestRequest a quote
  • Cross-section drawing to size: Cylindrical roller NJ, 30 × 72 × 19 mmNJ 306 ECPSKF30 × 72 × 19available to orderon requestRequest a quote

Under the price: the difference from the price of this bearing (€3.02).
02

Details

what this bearing is, questions

About the bearing

d×D×Bsize 30 × 72 × 19mm
Cdynamic 58.5kN
C0static 48kN
mweight 0.41kg

Cylindrical roller NJ bearing NJ 306.

C, C₀, m: CT data. Another brand publishes its own figures, so compare them against that brand’s catalogue.

Frequently asked questions

Will 306 C3 fit instead?

Same size, clearance greater than normal. C3 is used where the bearing runs hot or sits on the shaft with an interference fit. If the old bearing is not marked C3, take this one.

Can I fit another brand instead of this bearing?

Without checking, only an exact equivalent: the size, seal, clearance and design match according to the brand’s catalogue. Positions with the same geometry differ in seal, clearance or design, and each one says so in the equivalents block. Load ratings differ between manufacturers, so for a heavily loaded unit compare C.

How do I get a price and a lead time?

Press “Request a quote” and send the part number and quantity. We reply with the price, availability and delivery terms for your country.

03

Reviews

No reviews yet