+380 50 364 66 46 Mon–Fri 8:00–17:00 Kyiv time Wishlist0 Compare0
Drawing of NJ 2330 M: ⌀150 × ⌀320 × 108 mm⌀320⌀150108NJ 2330 M
Fig. 1: NJ 2330 M, end view and section; internal parts simplified per ISO 8826-1. Dimensions in mm

There is no photo of this product: the drawing shows the dimensions of NJ 2330 M

Load: radial high; axial low, on one sideCylindrical roller NJ

Bearing CT NJ 2330 M

Price on request
Available to order
Request a quote

Specifications

Manufacturer number
Equivalents
1 exact, 2 approximate
d
150 mm
Bore diameter dBearing bore = shaft diameter. Source: supplier data
D
320 mm
Outside diameter DOutside diameter = housing bore. Source: supplier data
B
108 mm
Width BRing width. Source: supplier data
Seal
open, no protection
Clearance
normal clearance
01

Equivalents

the same size 150 × 320 × 108 from other brands

3 products
Cross-section drawing to size: Cylindrical roller NJ, 150 × 320 × 108 mm
You are viewingCT NJ 2330 M

Same size, different design: the difference is written in the row.

  • Cross-section drawing to size: Cylindrical roller NU, 150 × 320 × 108 mmNU 2330 M C3clearance C3CT150 × 320 × 108available to orderon requestRequest a quote
  • Cross-section drawing to size: Cylindrical roller, 150 × 320 × 108 mmSL 192330SL: not decodedNEU150 × 320 × 108available to order€970.79Request a quote
02

Details

what this bearing is, questions

About the bearing

d×D×Bsize 150 × 320 × 108mm

Cylindrical roller NJ bearing NJ 2330 M.

Frequently asked questions

Will 2330 C3 fit instead?

Same size, clearance greater than normal. C3 is used where the bearing runs hot or sits on the shaft with an interference fit. If the old bearing is not marked C3, take this one.

Can I fit another brand instead of this bearing?

Without checking, only an exact equivalent: the size, seal, clearance and design match according to the brand’s catalogue. Positions with the same geometry differ in seal, clearance or design, and each one says so in the equivalents block. Load ratings differ between manufacturers, so for a heavily loaded unit compare C.

How do I get a price and a lead time?

Press “Request a quote” and send the part number and quantity. We reply with the price, availability and delivery terms for your country.

03

Reviews

No reviews yet