+380 50 364 66 46 Mon–Fri 8:00–17:00 Kyiv time Wishlist0 Compare0
Prices are in euros. The final price and delivery cost are confirmed in the quote.
Drawing of NJ 217 single box: ⌀85 × ⌀150 × 28 mm⌀150⌀8528NJ 217 single box
Fig. 1: NJ 217 single box, end view and section; internal parts simplified per ISO 8826-1. Dimensions in mm

There is no photo of this product: the drawing shows the dimensions of NJ 217

Load: radial high; axial low, on one sideCylindrical roller NJ

Bearing CT NJ 217

€9.32per piece
In stock: 40 pcs
Request a quote

Specifications

Manufacturer number
Equivalents
6 exact, 10 approximate
d
85 mm
Bore diameter dBearing bore = shaft diameter. Source: two supplier sources
D
150 mm
Outside diameter DOutside diameter = housing bore. Source: two supplier sources
B
28 mm
Width BRing width. Source: two supplier sources
Seal
open, no protection
Clearance
normal clearance
01

Equivalents

the same size 85 × 150 × 28 from other brands

17 products
Cross-section drawing to size: Cylindrical roller NJ, 85 × 150 × 28 mm
You are viewingCT NJ 217
€9.32baseline for the price comparison

Size and design match across the brand catalogues. The codes in the number are read against the CT catalogue.

  • Cross-section drawing to size: Cylindrical roller NJ, 85 × 150 × 28 mmNJ 217 single boxThis bearingCT85 × 150 × 2840 pcs€9.32you are here
  • Cross-section drawing to size: Cylindrical roller NJ, 85 × 150 × 28 mmNJ 217CT85 × 150 × 28available to order€11.46+€2.14Request a quote
  • Photo: NJ 217 ENJ 217 EZ&S85 × 150 × 28available to order€26.30+€16.98Request a quote
  • Series illustration (not a photo of this item): NJ 217 ENJ 217 EKG85 × 150 × 28available to orderon requestRequest a quote
  • Cross-section drawing to size: Cylindrical roller NJ, 85 × 150 × 28 mmNJ 217 EMno brand85 × 150 × 28available to orderon requestRequest a quote
  • Series illustration (not a photo of this item): NJ217ENJ217ENTE85 × 150 × 28available to orderon requestRequest a quote

Under the price: the difference from the price of this bearing (€9.32).
02

Details

what this bearing is, questions

About the bearing

d×D×Bsize 85 × 150 × 28mm

Cylindrical roller NJ bearing NJ 217 single box.

Frequently asked questions

Will 217 C3 fit instead?

Same size, clearance greater than normal. C3 is used where the bearing runs hot or sits on the shaft with an interference fit. If the old bearing is not marked C3, take this one.

Can I fit another brand instead of this bearing?

Without checking, only an exact equivalent: the size, seal, clearance and design match according to the brand’s catalogue. Positions with the same geometry differ in seal, clearance or design, and each one says so in the equivalents block. Load ratings differ between manufacturers, so for a heavily loaded unit compare C.

How do I get a price and a lead time?

Press “Request a quote” and send the part number and quantity. We reply with the price, availability and delivery terms for your country.

03

Reviews

No reviews yet