+380 50 364 66 46 Mon–Fri 8:00–17:00 Kyiv time Wishlist0 Compare0
Prices are in euros. The final price and delivery cost are confirmed in the quote.
Drawing of NJ 216: ⌀80 × ⌀140 × 26 mm⌀140⌀8026NJ 216
Fig. 1: NJ 216, end view and section; internal parts simplified per ISO 8826-1. Dimensions in mm

There is no photo of this product: the drawing shows the dimensions of NJ 216

Load: radial high; axial low, on one sideCylindrical roller NJ

Bearing CT NJ 216

€8.11per piece
In stock: 50 pcs
Request a quote

Specifications

Manufacturer number
Equivalents
7 exact, 12 approximate
d
80 mm
Bore diameter dBearing bore = shaft diameter. Source: two supplier sources
D
140 mm
Outside diameter DOutside diameter = housing bore. Source: two supplier sources
B
26 mm
Width BRing width. Source: two supplier sources
Seal
open, no protection
Clearance
normal clearance
C
160 kN
Basic dynamic load rating CLoad for one million revolutions at 90 % reliability; the L10 life is calculated from it as (C/P)^p. ISO method, manufacturer’s figure: do not carry it over to another brand. Source: supplier data
C0
166 kN
Basic static load rating C0Permissible load without rotation and under shock; ISO 76 method, manufacturer’s figure. Source: supplier data
m
1.6 kg
MassWeight of the product. Source: supplier data
01

Equivalents

the same size 80 × 140 × 26 from other brands

19 products
Cross-section drawing to size: Cylindrical roller NJ, 80 × 140 × 26 mm
You are viewingCT NJ 216
€8.11baseline for the price comparison

Size and design match across the brand catalogues. The codes in the number are read against the CT catalogue.

  • Cross-section drawing to size: Cylindrical roller NJ, 80 × 140 × 26 mmNJ 216This bearingCT80 × 140 × 2650 pcs€8.11you are here
  • Photo: NJ 216 ENJ 216 EZ&S80 × 140 × 26available to order€24.34+€16.23Request a quote
  • Cross-section drawing to size: Cylindrical roller NJ, 80 × 140 × 26 mmNJ 216no brand80 × 140 × 26available to orderon requestRequest a quote
  • Cross-section drawing to size: Cylindrical roller NJ, 80 × 140 × 26 mmNJ 216NSK80 × 140 × 26available to orderon requestRequest a quote
  • Series illustration (not a photo of this item): NJ216ENJ216ENTE80 × 140 × 26available to orderon requestRequest a quote
  • Cross-section drawing to size: Cylindrical roller NJ, 80 × 140 × 26 mmNJ 216 ECMSKF80 × 140 × 26available to orderon requestRequest a quote
  • Series illustration (not a photo of this item): NJ 216 ECPNJ 216 ECPSKF80 × 140 × 26available to orderon requestRequest a quote

Under the price: the difference from the price of this bearing (€8.11).
02

Details

what this bearing is, questions

About the bearing

d×D×Bsize 80 × 140 × 26mm
Cdynamic 160kN
C0static 166kN
mweight 1.6kg

Cylindrical roller NJ bearing NJ 216.

C, C₀, m: CT data. Another brand publishes its own figures, so compare them against that brand’s catalogue.

Frequently asked questions

Will 216 C3 fit instead?

Same size, clearance greater than normal. C3 is used where the bearing runs hot or sits on the shaft with an interference fit. If the old bearing is not marked C3, take this one.

Can I fit another brand instead of this bearing?

Without checking, only an exact equivalent: the size, seal, clearance and design match according to the brand’s catalogue. Positions with the same geometry differ in seal, clearance or design, and each one says so in the equivalents block. Load ratings differ between manufacturers, so for a heavily loaded unit compare C.

How do I get a price and a lead time?

Press “Request a quote” and send the part number and quantity. We reply with the price, availability and delivery terms for your country.

03

Reviews

No reviews yet