+380 50 364 66 46 Mon–Fri 8:00–17:00 Kyiv time Wishlist0 Compare0
Drawing of N 226: ⌀130 × ⌀230 × 40 mm⌀230⌀13040N 226
Fig. 1: N 226, end view and section; internal parts simplified per ISO 8826-1. Dimensions in mm

There is no photo of this product: the drawing shows the dimensions of N 226

Load: radial high; no axial loadCylindrical roller N

Bearing CT N 226

Price on request
Available to order
Request a quote

Specifications

Manufacturer number
Equivalents
8 exact, 14 approximate
d
130 mm
Bore diameter dBearing bore = shaft diameter. Source: supplier data
D
230 mm
Outside diameter DOutside diameter = housing bore. Source: supplier data
B
40 mm
Width BRing width. Source: supplier data
Seal
open, no protection
Clearance
normal clearance
01

Equivalents

the same size 130 × 230 × 40 from other brands

23 products
Cross-section drawing to size: Cylindrical roller N, 130 × 230 × 40 mm
You are viewingCT N 226

Size and design match across the brand catalogues. The codes in the number are read against the CT catalogue.

  • Cross-section drawing to size: Cylindrical roller N, 130 × 230 × 40 mmN 226This bearingCT130 × 230 × 40available to orderon requestyou are here
  • Cross-section drawing to size: Cylindrical roller N, 130 × 230 × 40 mmN 226 MCT130 × 230 × 40available to orderon requestRequest a quote
  • Cross-section drawing to size: Cylindrical roller N, 130 × 230 × 40 mmN226EMDYZV130 × 230 × 40available to orderon requestRequest a quote
  • Cross-section drawing to size: Cylindrical roller N, 130 × 230 × 40 mmN 226 MKG130 × 230 × 40available to orderon requestRequest a quote
  • Cross-section drawing to size: Cylindrical roller N, 130 × 230 × 40 mmN 226 MNSK130 × 230 × 40available to orderon requestRequest a quote
  • Cross-section drawing to size: Cylindrical roller N, 130 × 230 × 40 mmN 226 WNSK130 × 230 × 40available to orderon requestRequest a quote
  • Cross-section drawing to size: Cylindrical roller N, 130 × 230 × 40 mmN 226 MNTE130 × 230 × 40available to orderon requestRequest a quote
  • Cross-section drawing to size: Cylindrical roller N, 130 × 230 × 40 mmN226NTE130 × 230 × 40available to orderon requestRequest a quote
02

Details

what this bearing is, questions

About the bearing

d×D×Bsize 130 × 230 × 40mm

Cylindrical roller N bearing N 226.

Frequently asked questions

Will 226 C3 fit instead?

Same size, clearance greater than normal. C3 is used where the bearing runs hot or sits on the shaft with an interference fit. If the old bearing is not marked C3, take this one.

Can I fit another brand instead of this bearing?

Without checking, only an exact equivalent: the size, seal, clearance and design match according to the brand’s catalogue. Positions with the same geometry differ in seal, clearance or design, and each one says so in the equivalents block. Load ratings differ between manufacturers, so for a heavily loaded unit compare C.

How do I get a price and a lead time?

Press “Request a quote” and send the part number and quantity. We reply with the price, availability and delivery terms for your country.

03

Reviews

No reviews yet