+380 50 364 66 46 Mon–Fri 8:00–17:00 Kyiv time Wishlist0 Compare0
Prices are in euros. The final price and delivery cost are confirmed in the quote.
Drawing of 1214: ⌀70 × ⌀125 × 24 mm⌀125⌀70241214
Fig. 1: 1214, end view and section; internal parts simplified per ISO 8826-1. Dimensions in mm

There is no photo of this product: the drawing shows the dimensions of 1214

Load: radial medium; axial low, on both sidesSelf-aligning ball

Bearing CT 1214

€6.09per piece
In stock: 31 pcs
Request a quote

Specifications

Manufacturer number
Equivalents
1 exact, 3 approximate
d
70 mm
Bore diameter dBearing bore = shaft diameter. Source: two supplier sources
D
125 mm
Outside diameter DOutside diameter = housing bore. Source: two supplier sources
B
24 mm
Width BRing width. Source: two supplier sources
Seal
open, no protection
Clearance
normal clearance
C
35.8 kN
Basic dynamic load rating CLoad for one million revolutions at 90 % reliability; the L10 life is calculated from it as (C/P)^p. ISO method, manufacturer’s figure: do not carry it over to another brand. Source: supplier data
C0
14.6 kN
Basic static load rating C0Permissible load without rotation and under shock; ISO 76 method, manufacturer’s figure. Source: supplier data
m
1.25 kg
MassWeight of the product. Source: supplier data
01

Equivalents

the same size 70 × 125 × 24 from other brands

4 products
Series illustration (not a photo of this item): 1214
You are viewingCT 1214
€6.09baseline for the price comparison

Same size, different design: the difference is written in the row.

Under the price: the difference from the price of this bearing (€6.09).
02

Details

what this bearing is, questions

About the bearing

d×D×Bsize 70 × 125 × 24mm
Cdynamic 35.8kN
C0static 14.6kN
mweight 1.25kg

Self-aligning ball bearing 1214. Under GOST the same bearing is designated 1214.

C, C₀, m: CT data. Another brand publishes its own figures, so compare them against that brand’s catalogue.

Frequently asked questions

What is 1214?

It is the same bearing under GOST 3189-89: 1214 corresponds to the ISO base 1214. Size 70 × 125 × 24 mm, a full equivalent of 1214.

Will 1214 C3 fit instead?

Same size, clearance greater than normal. C3 is used where the bearing runs hot or sits on the shaft with an interference fit. If the old bearing is not marked C3, take this one.

Can I fit another brand instead of this bearing?

Without checking, only an exact equivalent: the size, seal, clearance and design match according to the brand’s catalogue. Positions with the same geometry differ in seal, clearance or design, and each one says so in the equivalents block. Load ratings differ between manufacturers, so for a heavily loaded unit compare C.

How do I get a price and a lead time?

Press “Request a quote” and send the part number and quantity. We reply with the price, availability and delivery terms for your country.

03

Reviews

No reviews yet