+380 50 364 66 46 Mon–Fri 8:00–17:00 Kyiv time Wishlist0 Compare0
Prices are in euros. The final price and delivery cost are confirmed in the quote.
Drawing of 7805: ⌀26 × ⌀57.15 × 17.462 mm⌀57.15⌀26T 17.462α7805
Fig. 1: 7805, end view and section; internal parts simplified per ISO 8826-1; GOST number, dimensions from the GOST↔ISO table CX p.789. Dimensions in mm

There is no photo of this product: the drawing shows the dimensions of 7805

Combined load at an angle (tapered, high), axial on one sideTapered roller

Bearing CT Malaysia 7805

€1.47per piece
In stock: 20 pcs
Request a quote

Specifications

Manufacturer number
Equivalents
4 exact, 0 approximate
d
26 mm
Bore diameter dBearing bore = shaft diameter. Source: supplier data
D
57.15 mm
Outside diameter DOutside diameter = housing bore. Source: supplier data
T
17.462 mm
Total width TOverall width of an assembled tapered roller bearing. Source: supplier data
01

Equivalents

the same size 26 × 57.15 × 17.462 from other brands

4 products
Cross-section drawing to size: Tapered roller, 26 × 57.15 × T 17.462 mm
You are viewingCT 7805
€1.47baseline for the price comparison

Everything the number specifies matches: series 78, 26 × 57.15 mm, ordinary steel, design without special letters. The codes in the number are read against the CT catalogue.

  • Cross-section drawing to size: Tapered roller, 26 × 57.15 × T 17.462 mm7805This bearingCT26 × 57.15 × ?20 pcs€1.47you are here
  • Type diagram, no dimensions: bearing7805no brand26 × 57.15 × ?available to orderon requestRequest a quote
  • Type diagram, no dimensions: bearing7805KG26 × 57.15 × ?available to orderon requestRequest a quote
  • Type diagram, no dimensions: bearing7805NTE26 × 57.15 × ?available to orderon requestRequest a quote

Under the price: the difference from the price of this bearing (€1.47).
02

Details

what this bearing is, questions

About the bearing

d×D×Tsize 26 × 57.15 × 17.462mm

Tapered roller bearing 7805.

Frequently asked questions

Can I fit another brand instead of this bearing?

Without checking, only an exact equivalent: the size, seal, clearance and design match according to the brand’s catalogue. Positions with the same geometry differ in seal, clearance or design, and each one says so in the equivalents block. Load ratings differ between manufacturers, so for a heavily loaded unit compare C.

How do I get a price and a lead time?

Press “Request a quote” and send the part number and quantity. We reply with the price, availability and delivery terms for your country.

03

Reviews

No reviews yet