+380 50 364 66 46 Mon–Fri 8:00–17:00 Kyiv time Wishlist0 Compare0
Drawing of 7322ACM: ⌀110 × ⌀240 × 50 mm⌀240⌀110507322ACM
Fig. 1: 7322ACM, end view and section; internal parts simplified per ISO 8826-1. Dimensions in mm

There is no photo of this product: the drawing shows the dimensions of 7322ACM

Combined load at an angle (angular contact), axial on one sideAngular contact ball

Bearing CT 7322ACM

Price on request
Available to order
Request a quote

Specifications

Manufacturer number
ISO designation
Equivalents
2 exact, 8 approximate
d
110 mm
Bore diameter dBearing bore = shaft diameter. Source: supplier data
D
240 mm
Outside diameter DOutside diameter = housing bore. Source: supplier data
B
50 mm
Width BRing width. Source: supplier data
Seal
open, no protection
C
232 kN
Basic dynamic load rating CLoad for one million revolutions at 90 % reliability; the L10 life is calculated from it as (C/P)^p. ISO method, manufacturer’s figure: do not carry it over to another brand. Source: supplier data
01

Equivalents

the same size 110 × 240 × 50 from other brands

10 products
Cross-section drawing to size: Angular contact ball, 110 × 240 × 50 mm
You are viewingCT 7322ACM

Everything the number specifies matches: series 73, 110 × 240 × 50 mm, open, no protection, AC, special design. The codes in the number are read against the CT catalogue.

  • Cross-section drawing to size: Angular contact ball, 110 × 240 × 50 mm7322ACMThis bearingCT110 × 240 × 50available to orderon requestyou are here
  • Cross-section drawing to size: Angular contact ball, 110 × 240 × 50 mm7322ACMDYZV110 × 240 × 50available to orderon requestRequest a quote
02

Details

what this bearing is, questions

About the bearing

D 240d 110B 50
d×D×Bsize 110 × 240 × 50mm
Cdynamic 232kN

Angular contact ball bearing 7322 AC.

C: CT data. Another brand publishes its own figures, so compare them against that brand’s catalogue.

Frequently asked questions

Can I fit another brand instead of this bearing?

Without checking, only an exact equivalent: the size, seal, clearance and design match according to the brand’s catalogue. Positions with the same geometry differ in seal, clearance or design, and each one says so in the equivalents block. Load ratings differ between manufacturers, so for a heavily loaded unit compare C.

How do I get a price and a lead time?

Press “Request a quote” and send the part number and quantity. We reply with the price, availability and delivery terms for your country.

03

Reviews

No reviews yet