+380 50 364 66 46 Mon–Fri 8:00–17:00 Kyiv time Wishlist0 Compare0
Drawing of 7322 BM: ⌀110 × ⌀240 × 50 mm⌀240⌀110507322 BM
Fig. 1: 7322 BM, end view and section; internal parts simplified per ISO 8826-1. Dimensions in mm

There is no photo of this product: the drawing shows the dimensions of 7322 BM

Combined load at an angle (angular contact), axial on one sideAngular contact ball

Bearing CT 7322 BM

Price on request
Available to order
Request a quote

Specifications

Manufacturer number
ISO designation
GOST number
Equivalents
2 exact, 7 approximate
d
110 mm
Bore diameter dBearing bore = shaft diameter. Source: supplier data
D
240 mm
Outside diameter DOutside diameter = housing bore. Source: supplier data
B
50 mm
Width BRing width. Source: supplier data
Seal
open, no protection
C
213 kN
Basic dynamic load rating CLoad for one million revolutions at 90 % reliability; the L10 life is calculated from it as (C/P)^p. ISO method, manufacturer’s figure: do not carry it over to another brand. Source: supplier data
01

Equivalents

the same size 110 × 240 × 50 from other brands

10 products
Cross-section drawing to size: Angular contact ball, 110 × 240 × 50 mm
You are viewingCT 7322 BM

Everything the number specifies matches: series 73, 110 × 240 × 50 mm, open, no protection, B, special design. The codes in the number are read against the CT catalogue.

  • Cross-section drawing to size: Angular contact ball, 110 × 240 × 50 mm7322 BMThis bearingCT110 × 240 × 50available to orderon requestyou are here
  • Cross-section drawing to size: Angular contact ball, 110 × 240 × 50 mm7322BMNTE110 × 240 × 50available to orderon requestRequest a quote
02

Details

what this bearing is, questions

About the bearing

D 240d 110B 50
d×D×Bsize 110 × 240 × 50mm
Cdynamic 213kN

Angular contact ball bearing 7322 B. Under GOST the same bearing is designated 66322.

C: CT data. Another brand publishes its own figures, so compare them against that brand’s catalogue.

Frequently asked questions

What is 66322?

It is the same bearing under GOST 3189-89: 66322 corresponds to the ISO base 7322 B. Size 110 × 240 × 50 mm, a full equivalent of 7322 B.

Can I fit another brand instead of this bearing?

Without checking, only an exact equivalent: the size, seal, clearance and design match according to the brand’s catalogue. Positions with the same geometry differ in seal, clearance or design, and each one says so in the equivalents block. Load ratings differ between manufacturers, so for a heavily loaded unit compare C.

How do I get a price and a lead time?

Press “Request a quote” and send the part number and quantity. We reply with the price, availability and delivery terms for your country.

03

Reviews

No reviews yet