+380 50 364 66 46 Mon–Fri 8:00–17:00 Kyiv time Wishlist0 Compare0
Prices are in euros. The final price and delivery cost are confirmed in the quote.
Drawing of 7305 BTNG: ⌀25 × ⌀62 × 17 mm⌀62⌀25177305 BTNG
Fig. 1: 7305 BTNG, end view and section; internal parts simplified per ISO 8826-1. Dimensions in mm

There is no photo of this product: the drawing shows the dimensions of 7305 BTNG

Combined load at an angle (angular contact), axial on one sideAngular contact ball

Bearing CT 7305 BTNG

€1.45per piece
In stock: 200 pcs
Request a quote

Specifications

Manufacturer number
ISO designation
Equivalents
5 exact, 8 approximate
d
25 mm
Bore diameter dBearing bore = shaft diameter. Source: two supplier sources
D
62 mm
Outside diameter DOutside diameter = housing bore. Source: two supplier sources
B
17 mm
Width BRing width. Source: two supplier sources
Seal
open, no protection
01

Equivalents

the same size 25 × 62 × 17 from other brands

16 products
Cross-section drawing to size: Angular contact ball, 25 × 62 × 17 mm
You are viewingCT 7305 BTNG
€1.45baseline for the price comparison

Everything the number specifies matches: series 73, 25 × 62 × 17 mm, open, no protection, B, special design. The codes in the number are read against the CT catalogue.

  • Cross-section drawing to size: Angular contact ball, 25 × 62 × 17 mm7305 BTNGThis bearingCT25 × 62 × 17200 pcs€1.45you are here
  • Photo: 7305 B7305 BSTEYR25 × 62 × 17available to order€19.75+€18.30Request a quote
  • Series illustration (not a photo of this item): 7305 B7305 BDKF25 × 62 × 17out of stockon requestRequest a quote
  • Series illustration (not a photo of this item): 7305 B7305 BFAG25 × 62 × 17out of stockon requestRequest a quote
  • Series illustration (not a photo of this item): 7305 B7305 BKG25 × 62 × 17available to orderon requestRequest a quote

Under the price: the difference from the price of this bearing (€1.45).
02

Details

what this bearing is, questions

About the bearing

D 62d 25B 17
d×D×Bsize 25 × 62 × 17mm

Angular contact ball bearing 7305 B.

Frequently asked questions

Can I fit another brand instead of this bearing?

Without checking, only an exact equivalent: the size, seal, clearance and design match according to the brand’s catalogue. Positions with the same geometry differ in seal, clearance or design, and each one says so in the equivalents block. Load ratings differ between manufacturers, so for a heavily loaded unit compare C.

How do I get a price and a lead time?

Press “Request a quote” and send the part number and quantity. We reply with the price, availability and delivery terms for your country.

03

Reviews

No reviews yet