+380 50 364 66 46 Mon–Fri 8:00–17:00 Kyiv time Wishlist0 Compare0
Prices are in euros. The final price and delivery cost are confirmed in the quote.
Drawing of 7020 ACTNG: ⌀100 × ⌀150 × 24 mm⌀150⌀100247020 ACTNG
Fig. 1: 7020 ACTNG, end view and section; internal parts simplified per ISO 8826-1. Dimensions in mm

There is no photo of this product: the drawing shows the dimensions of 7020 ACTNG

Combined load at an angle (angular contact), axial on one sideAngular contact ball

Bearing CT 7020 ACTNG

€8.42per piece
Available to orderThe manager confirms the lead time
Request a quote

Specifications

Manufacturer number
ISO designation
Equivalents
3 exact, 6 approximate
d
100 mm
Bore diameter dBearing bore = shaft diameter. Source: supplier data
D
150 mm
Outside diameter DOutside diameter = housing bore. Source: supplier data
B
24 mm
Width BRing width. Source: supplier data
Seal
open, no protection
01

Equivalents

the same size 100 × 150 × 24 from other brands

10 products
Cross-section drawing to size: Angular contact ball, 100 × 150 × 24 mm
You are viewingCT 7020 ACTNG
€8.42baseline for the price comparison

Everything the number specifies matches: series 70, 100 × 150 × 24 mm, open, no protection, AC, special design. The codes in the number are read against the CT catalogue.

  • Cross-section drawing to size: Angular contact ball, 100 × 150 × 24 mm7020 ACTNGThis bearingCT100 × 150 × 24available to order€8.42you are here
  • Series illustration (not a photo of this item): 7020 AC7020 ACCT100 × 150 × 24available to orderon requestRequest a quote
  • Series illustration (not a photo of this item): 7020 AC7020 ACKG100 × 150 × 24available to orderon requestRequest a quote

Under the price: the difference from the price of this bearing (€8.42).
02

Details

what this bearing is, questions

About the bearing

D 150d 100B 24
d×D×Bsize 100 × 150 × 24mm

Angular contact ball bearing 7020 AC.

Frequently asked questions

Can I fit another brand instead of this bearing?

Without checking, only an exact equivalent: the size, seal, clearance and design match according to the brand’s catalogue. Positions with the same geometry differ in seal, clearance or design, and each one says so in the equivalents block. Load ratings differ between manufacturers, so for a heavily loaded unit compare C.

How do I get a price and a lead time?

Press “Request a quote” and send the part number and quantity. We reply with the price, availability and delivery terms for your country.

03

Reviews

No reviews yet