+380 50 364 66 46 Mon–Fri 8:00–17:00 Kyiv time Wishlist0 Compare0
Prices are in euros. The final price and delivery cost are confirmed in the quote.
Drawing of 6907 / 61907 ZZ: ⌀35 × ⌀55 × 10 mm6907 / 61907 ZZZZ
Fig. 1: 6907 / 61907 ZZ, end view and section; rolling element geometry per the NSK catalogue. Dimensions in mm

There is no photo of this product: the drawing shows the dimensions of 6907 / 61907 ZZ

Load: radial medium; axial low, on both sidesDeep groove ball

Bearing CT 6907 / 61907 ZZ

€0.79per piece
In stock: 384 pcs
Request a quote

Specifications

Manufacturer number
ISO designation
Equivalents
3 exact, 15 approximate
d
35 mm
Bore diameter dBearing bore = shaft diameter. Source: two supplier sources
D
55 mm
Outside diameter DOutside diameter = housing bore. Source: two supplier sources
B
10 mm
Width BRing width. Source: two supplier sources
Seal
ZZshields, both sides
Clearance
normal clearance
01

Equivalents

the same size 35 × 55 × 10 from other brands

18 products
Series illustration (not a photo of this item): 6907 / 61907 ZZ
You are viewingCT 6907 / 61907 ZZ
€0.79baseline for the price comparison

Everything the number specifies matches: series 619, 35 × 55 × 10 mm, metal shields on both sides, normal clearance, ordinary steel, design without special letters. The codes in the number are read against the CT catalogue.

  • Series illustration (not a photo of this item): 6907 / 61907 ZZ6907 / 61907 ZZThis bearingCT35 × 55 × 10384 pcs€0.79you are here
  • Series illustration (not a photo of this item): 6907 ZZ6907 ZZCT35 × 55 × 10available to orderon requestRequest a quote
  • Series illustration (not a photo of this item): 6907 ZZ6907 ZZKG35 × 55 × 10available to orderon requestRequest a quote

Under the price: the difference from the price of this bearing (€0.79).
02

Details

what this bearing is, questions

About the bearing

D 55d 35B 10
d×D×Bsize 35 × 55 × 10mm

Deep groove ball bearing 61907-ZZ, design ZZ: metal shields on both sides.

Frequently asked questions

How does 2RS differ from ZZ?

2RS has rubber seals that touch the inner ring and keep out dust and water better, which is the usual choice for field machinery. ZZ has metal shields that do not touch, allow higher speeds, and protect against dirt less well.

Can I fit another brand instead of this bearing?

Without checking, only an exact equivalent: the size, seal, clearance and design match according to the brand’s catalogue. Positions with the same geometry differ in seal, clearance or design, and each one says so in the equivalents block. Load ratings differ between manufacturers, so for a heavily loaded unit compare C.

How do I get a price and a lead time?

Press “Request a quote” and send the part number and quantity. We reply with the price, availability and delivery terms for your country.

03

Reviews

No reviews yet