+380 50 364 66 46 Mon–Fri 8:00–17:00 Kyiv time Wishlist0 Compare0
Prices are in euros. The final price and delivery cost are confirmed in the quote.
Drawing of 6803 / 61803 ZZ: ⌀17 × ⌀26 × 5 mm6803 / 61803 ZZZZ
Fig. 1: 6803 / 61803 ZZ, end view and section; rolling element geometry per the NSK catalogue. Dimensions in mm

There is no photo of this product: the drawing shows the dimensions of 6803 / 61803 ZZ

Load: radial medium; axial low, on both sidesDeep groove ball

Bearing CT 6803 / 61803 ZZ

€0.22per piece
Available to orderThe manager confirms the lead time
Request a quote

Specifications

Manufacturer number
ISO designation
Equivalents
4 exact, 9 approximate
d
17 mm
Bore diameter dBearing bore = shaft diameter. Source: two supplier sources
D
26 mm
Outside diameter DOutside diameter = housing bore. Source: two supplier sources
B
5 mm
Width BRing width. Source: two supplier sources
Seal
ZZshields, both sides
Clearance
normal clearance
01

Equivalents

the same size 17 × 26 × 5 from other brands

13 products
Series illustration (not a photo of this item): 6803 / 61803 ZZ
You are viewingCT 6803 / 61803 ZZ
€0.22baseline for the price comparison

Everything the number specifies matches: series 618, 17 × 26 × 5 mm, metal shields on both sides, normal clearance, ordinary steel, design without special letters. The codes in the number are read against the CT catalogue.

  • Series illustration (not a photo of this item): 6803 / 61803 ZZ6803 / 61803 ZZThis bearingCT17 × 26 × 5available to order€0.22you are here
  • Series illustration (not a photo of this item): 6803 ZZ6803 ZZno brand17 × 26 × 5available to orderon requestRequest a quote
  • Series illustration (not a photo of this item): 61803 2Z61803 2ZFAG17 × 26 × 5available to orderon requestRequest a quote
  • Series illustration (not a photo of this item): 61803-2Z61803-2ZSKF17 × 26 × 5available to orderon requestRequest a quote

Under the price: the difference from the price of this bearing (€0.22).
02

Details

what this bearing is, questions

About the bearing

D 26d 17B 5
d×D×Bsize 17 × 26 × 5mm

Deep groove ball bearing 61803-ZZ, design ZZ: metal shields on both sides.

Frequently asked questions

How does 2RS differ from ZZ?

2RS has rubber seals that touch the inner ring and keep out dust and water better, which is the usual choice for field machinery. ZZ has metal shields that do not touch, allow higher speeds, and protect against dirt less well.

Can I fit another brand instead of this bearing?

Without checking, only an exact equivalent: the size, seal, clearance and design match according to the brand’s catalogue. Positions with the same geometry differ in seal, clearance or design, and each one says so in the equivalents block. Load ratings differ between manufacturers, so for a heavily loaded unit compare C.

How do I get a price and a lead time?

Press “Request a quote” and send the part number and quantity. We reply with the price, availability and delivery terms for your country.

03

Reviews

No reviews yet