+380 50 364 66 46 Mon–Fri 8:00–17:00 Kyiv time Wishlist0 Compare0
Prices are in euros. The final price and delivery cost are confirmed in the quote.
Drawing of 6701 2RS: ⌀12 × ⌀18 × 4 mm6701 2RS2RS
Fig. 1: 6701 2RS, end view and section; internal parts simplified per ISO 8826-1. Dimensions in mm

There is no photo of this product: the drawing shows the dimensions of 6701 2RS

Load: radial medium; axial low, on both sidesDeep groove ball

Bearing CT 6701 2RS

€0.30per piece
In stock: 449 pcs
Request a quote

Specifications

Manufacturer number
ISO designation
d
12 mm
Bore diameter dBearing bore = shaft diameter. Source: two supplier sources
D
18 mm
Outside diameter DOutside diameter = housing bore. Source: two supplier sources
B
4 mm
Width BRing width. Source: two supplier sources
Seal
2RSrubber, both sides
Clearance
normal clearance
01

Details

what this bearing is, questions

About the bearing

D 18d 12B 4
d×D×Bsize 12 × 18 × 4mm

Deep groove ball bearing 6701-2RS, design 2RS: contact seals on both sides.

Frequently asked questions

How does 2RS differ from ZZ?

2RS has rubber seals that touch the inner ring and keep out dust and water better, which is the usual choice for field machinery. ZZ has metal shields that do not touch, allow higher speeds, and protect against dirt less well.

Can I fit another brand instead of this bearing?

Without checking, only an exact equivalent: the size, seal, clearance and design match according to the brand’s catalogue. Positions with the same geometry differ in seal, clearance or design, and each one says so in the equivalents block. Load ratings differ between manufacturers, so for a heavily loaded unit compare C.

How do I get a price and a lead time?

Press “Request a quote” and send the part number and quantity. We reply with the price, availability and delivery terms for your country.

02

Reviews

No reviews yet