+380 50 364 66 46 Mon–Fri 8:00–17:00 Kyiv time Wishlist0 Compare0
Prices are in euros. The final price and delivery cost are confirmed in the quote.
Drawing of 6326: ⌀130 × ⌀280 × 58 mm6326
Fig. 1: 6326, end view and section; rolling element geometry per the NSK catalogue. Dimensions in mm

There is no photo of this product: the drawing shows the dimensions of 6326

Load: radial medium; axial low, on both sidesDeep groove ball

Bearing CT 6326

€49.72per piece
In stock: 15 pcs
Request a quote

Specifications

Manufacturer number
GOST number
Equivalents
7 exact, 10 approximate
d
130 mm
Bore diameter dBearing bore = shaft diameter. Source: two supplier sources
D
280 mm
Outside diameter DOutside diameter = housing bore. Source: two supplier sources
B
58 mm
Width BRing width. Source: two supplier sources
Seal
open, no protection
Clearance
normal clearance
C
230 kN
Basic dynamic load rating CLoad for one million revolutions at 90 % reliability; the L10 life is calculated from it as (C/P)^p. ISO method, manufacturer’s figure: do not carry it over to another brand. Source: supplier data
01

Equivalents

the same size 130 × 280 × 58 from other brands

17 products
Series illustration (not a photo of this item): 6326
You are viewingCT 6326
€49.72baseline for the price comparison

Everything the number specifies matches: series 63, 130 × 280 × 58 mm, open, no protection, normal clearance, ordinary steel, design without special letters. The codes in the number are read against the CT catalogue.

  • Series illustration (not a photo of this item): 63266326This bearingCT130 × 280 × 5815 pcs€49.72you are here
  • Series illustration (not a photo of this item): 63266326DYZV130 × 280 × 58available to orderon requestRequest a quote
  • Series illustration (not a photo of this item): 63266326FAG130 × 280 × 58available to orderon requestRequest a quote
  • Series illustration (not a photo of this item): 63266326KG130 × 280 × 58available to orderon requestRequest a quote
  • Series illustration (not a photo of this item): 63266326Koyo130 × 280 × 58available to orderon requestRequest a quote
  • Series illustration (not a photo of this item): 63266326NSK130 × 280 × 58available to orderon requestRequest a quote
  • Series illustration (not a photo of this item): 63266326SKF130 × 280 × 58available to orderon requestRequest a quote

Under the price: the difference from the price of this bearing (€49.72).
02

Details

what this bearing is, questions

About the bearing

D 280d 130B 58
d×D×Bsize 130 × 280 × 58mm
Cdynamic 230kN

Deep groove ball bearing 6326. Under GOST the same bearing is designated 326.

C: CT data. Another brand publishes its own figures, so compare them against that brand’s catalogue.

Frequently asked questions

What is 326?

It is the same bearing under GOST 3189-89: 326 corresponds to the ISO base 6326. Size 130 × 280 × 58 mm, a full equivalent of 6326.

Will 6326 C3 fit instead?

Same size, clearance greater than normal. C3 is used where the bearing runs hot or sits on the shaft with an interference fit. If the old bearing is not marked C3, take this one.

Can I fit another brand instead of this bearing?

Without checking, only an exact equivalent: the size, seal, clearance and design match according to the brand’s catalogue. Positions with the same geometry differ in seal, clearance or design, and each one says so in the equivalents block. Load ratings differ between manufacturers, so for a heavily loaded unit compare C.

How do I get a price and a lead time?

Press “Request a quote” and send the part number and quantity. We reply with the price, availability and delivery terms for your country.

03

Reviews

No reviews yet