+380 50 364 66 46 Mon–Fri 8:00–17:00 Kyiv time Wishlist0 Compare0
Prices are in euros. The final price and delivery cost are confirmed in the quote.
Simplified drawing of the bearing per ISO 8826-1, dimensions of 6310 N: ⌀50 × ⌀110 × 27 mm⌀110⌀50276310 N
Fig. 1: 6310 N, simplified drawing per ISO 8826-1. Dimensions in mm

There is no photo of this product: the drawing shows the dimensions of 6310 N

Load: radial medium; axial low, on both sidesDeep groove ball

Bearing CT Malaysia 6310 N

€3.47per piece
Available to orderThe manager confirms the lead time
Request a quote

Specifications

Manufacturer number
ISO designation
Equivalents
2 exact, 61 approximate
d
50 mm
Bore diameter dBearing bore = shaft diameter. Source: two supplier sources
D
110 mm
Outside diameter DOutside diameter = housing bore. Source: two supplier sources
B
27 mm
Width BRing width. Source: two supplier sources
Seal
open, no protection
Clearance
normal clearance
C
65 kN
Basic dynamic load rating CLoad for one million revolutions at 90 % reliability; the L10 life is calculated from it as (C/P)^p. ISO method, manufacturer’s figure: do not carry it over to another brand. Source: supplier data
C0
38 kN
Basic static load rating C0Permissible load without rotation and under shock; ISO 76 method, manufacturer’s figure. Source: supplier data
m
1.05 kg
MassWeight of the product. Source: supplier data
01

Equivalents

the same size 50 × 110 × 27 from other brands

63 products
Series illustration (not a photo of this item): 6310 N
You are viewingCT 6310 N
€3.47baseline for the price comparison

Everything the number specifies matches: series 63, 50 × 110 × 27 mm, open, no protection, N, normal clearance, special design. The codes in the number are read against the CT catalogue.

  • Series illustration (not a photo of this item): 6310 N6310 NThis bearingCT50 × 110 × 27available to order€3.47you are here
  • Series illustration (not a photo of this item): 6310 N6310 NKG50 × 110 × 27available to orderon requestRequest a quote

Under the price: the difference from the price of this bearing (€3.47).
02

Details

what this bearing is, questions

About the bearing

D 110d 50B 27
d×D×Bsize 50 × 110 × 27mm
Cdynamic 65kN
C0static 38kN
mweight 1.05kg

Deep groove ball bearing 6310.

C, C₀, m: CT data. Another brand publishes its own figures, so compare them against that brand’s catalogue.

Frequently asked questions

Will 6310 C3 fit instead?

Same size, clearance greater than normal. C3 is used where the bearing runs hot or sits on the shaft with an interference fit. If the old bearing is not marked C3, take this one.

Can I fit another brand instead of this bearing?

Without checking, only an exact equivalent: the size, seal, clearance and design match according to the brand’s catalogue. Positions with the same geometry differ in seal, clearance or design, and each one says so in the equivalents block. Load ratings differ between manufacturers, so for a heavily loaded unit compare C.

How do I get a price and a lead time?

Press “Request a quote” and send the part number and quantity. We reply with the price, availability and delivery terms for your country.

03

Reviews

No reviews yet