+380 50 364 66 46 Mon–Fri 8:00–17:00 Kyiv time Wishlist0 Compare0
Prices are in euros. The final price and delivery cost are confirmed in the quote.
Drawing of 6224: ⌀120 × ⌀215 × 40 mm6224
Fig. 1: 6224, end view and section; rolling element geometry per the NSK catalogue. Dimensions in mm

There is no photo of this product: the drawing shows the dimensions of 6224

Load: radial medium; axial low, on both sidesDeep groove ball

Bearing CT 6224

€15.54per piece
In stock: 11 pcs
Request a quote

Specifications

Manufacturer number
GOST number
Equivalents
5 exact, 4 approximate
d
120 mm
Bore diameter dBearing bore = shaft diameter. Source: two supplier sources
D
215 mm
Outside diameter DOutside diameter = housing bore. Source: two supplier sources
B
40 mm
Width BRing width. Source: two supplier sources
Seal
open, no protection
Clearance
normal clearance
C
146 kN
Basic dynamic load rating CLoad for one million revolutions at 90 % reliability; the L10 life is calculated from it as (C/P)^p. ISO method, manufacturer’s figure: do not carry it over to another brand. Source: supplier data
C0
118 kN
Basic static load rating C0Permissible load without rotation and under shock; ISO 76 method, manufacturer’s figure. Source: supplier data
m
5.15 kg
MassWeight of the product. Source: supplier data
01

Equivalents

the same size 120 × 215 × 40 from other brands

9 products
Series illustration (not a photo of this item): 6224
You are viewingCT 6224
€15.54baseline for the price comparison

Everything the number specifies matches: series 62, 120 × 215 × 40 mm, open, no protection, normal clearance, ordinary steel, design without special letters. The codes in the number are read against the CT catalogue.

  • Series illustration (not a photo of this item): 62246224This bearingCT120 × 215 × 4011 pcs€15.54you are here
  • Series illustration (not a photo of this item): 62246224NTE120 × 215 × 408 pcs€25.99+€10.45Request a quote
  • Series illustration (not a photo of this item): 62246224no brand120 × 215 × 40available to orderon requestRequest a quote
  • Series illustration (not a photo of this item): 62246224DYZV120 × 215 × 40available to orderon requestRequest a quote
  • Series illustration (not a photo of this item): 62246224KG120 × 215 × 40available to orderon requestRequest a quote

Under the price: the difference from the price of this bearing (€15.54).
02

Details

what this bearing is, questions

About the bearing

D 215d 120B 40
d×D×Bsize 120 × 215 × 40mm
Cdynamic 146kN
C0static 118kN
mweight 5.15kg

Deep groove ball bearing 6224. Under GOST the same bearing is designated 224.

C, C₀, m: CT data. Another brand publishes its own figures, so compare them against that brand’s catalogue.

Frequently asked questions

What is 224?

It is the same bearing under GOST 3189-89: 224 corresponds to the ISO base 6224. Size 120 × 215 × 40 mm, a full equivalent of 6224.

Will 6224 C3 fit instead?

Same size, clearance greater than normal. C3 is used where the bearing runs hot or sits on the shaft with an interference fit. If the old bearing is not marked C3, take this one.

Can I fit another brand instead of this bearing?

Without checking, only an exact equivalent: the size, seal, clearance and design match according to the brand’s catalogue. Positions with the same geometry differ in seal, clearance or design, and each one says so in the equivalents block. Load ratings differ between manufacturers, so for a heavily loaded unit compare C.

How do I get a price and a lead time?

Press “Request a quote” and send the part number and quantity. We reply with the price, availability and delivery terms for your country.

03

Reviews

No reviews yet